Dnia poniedziałek 21 luty 2005 23:53, Łukasz Maśko napisał: > Czy ktoś odpalił X-y na PowerPC (kernel 2.4.27-1) z kartą ATI Rage 128 na > sterowniku X11-driver-r128 ? Działa mi na fbdev, ale jakoś tak... dziwnie > (nie chce odpalić grafiki w trybie 1024x768, ale jeszcze nie umiem ustawiać > framebuffera). Przy próbie użycia drivera ati (r128) dostaję tylko taki > komunikat: > > X Window System Version 6.8.1 > Release Date: 17 September 2004 > X Protocol Version 11, Revision 0, Release 6.8.1 > Build Operating System: Linux 2.6.7 ppc [ELF] > Current Operating System: Linux japko 2.4.29-3smp #1 SMP Fri Feb 11 > 17:42:18 UTC 2005 ppc > Build Date: 10 December 2004 > Before reporting problems, check http://wiki.X.Org > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 21 20:36:33 2005 > (==) Using config file: "/etc/X11/xorg.conf" > (EE) R128(0): Cannot read V_BIOS (5) > > *** If unresolved symbols were reported above, they might not > *** be the reason for the server aborting. > > Fatal server error: > Caught signal 7. Server aborting > > > Please consult the The X.Org Foundation support > at http://wiki.X.Org > for help. > Please also check the log file at "/var/log/Xorg.0.log" for additional > information. > > XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" > after 0 requests (0 known processed) with 0 events remaining. > > Załadowany odpowiedni moduł dri (r128), zamontowane /dev/drm (może > niekoniecznie potrzebne, ale nie przeszkadza), itp, itd. Niby wszystko OK. > Ale nie działa. Czy ten typ tak ma i nie ma innego wyjścia, jak używać > framebuffera, czy też da się jakoś odpalić natywny sterownik? Jeśli to > drugie - to oczywiście jak :-) > > Pozdrawiam. use_fbdev = Yes or sth. (przy uzywaniu sterownika r128) -- Witold Kręcicki (adasi) adasi [at] culm.net GPG key: 7AE20871 http://www.culm.net
_______________________________________________ pld-users-pl mailing list [email protected] http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
