Hello,
I began the installation
of windows 95
but I get the following message
during the 'scandisk' :
(translated from french)
--------
ScanDisk can't read the last cluster
of the C device.(...)
The C device has maybe to have LBA enable
or the partition is maybe marked
as non LBA partition
or the partition type of this device
is bad configured.
Verify the utility of installation BIOS.
--------
The trace shows that an exception
has been thrown :
::read_virtual_checks EXCEPTION: seg=3 0:68F90 + 4
What is wrong ?
Thanks, J�r�me
ps: I used cvs from june 18
Trace
--------------------
Processing command-line options
Opening VM (/dev/plex86)
Processing config file ../../../.plex-conf...
Allocating 16MB of physical memory in VM
Mapping virtualized physical memory into monitor
Zeroing virtualized physical memory
Mapping monitor print buffer into user mem.
bochs: ips = 1000000
unmapped_c::init: IGNORING unmapped ports
bochs: [cmos] Setting initial clock to: Wed Sep 29 01:12:35 1999
disk: Experimental CDROM on target 1
disk: Media present in CD-ROM drive
#cdrom: capacity: 290454
bochs: Opening image for device 0
bochs: bx_options.floppy_command_delay = 500
vga construct static
bochs: font_width = 8
bochs: font_height = 16
bochs: default_depth = 24
bochs: waiting for MapNotify
bochs: MapNotify found.
bochs: vga: interval=400000
vga init called
bochs: TTY not used, serial port is not connected
ROM: loading image '../bios/BIOS-plex86-current' @ 0xf0000 (65536 bytes)
ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
Setting prescan depth to 3
prescan on
Processed 63 lines of config file '../../../.plex-conf'
Initializing plugins
Running VM
bochs: timer0 period set to 18 hz
bochs: CMOS: write reg 14h: value = 05h
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: *** io read 3c5 case 1: sequencer clocking mode
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: *** io read 3c5 case 1: sequencer clocking mode
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
bochs: disk: Not implemented command
bochs: disk: aborting on command 0x08 {DISK}
bochs: disk: aborting on command 0xec {CD-ROM}
bochs: disk: enabling LBA mode
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
............. idem x~30 ...................
floppy io: cylinder request != current cylinder
floppy io: cylinder request != current cylinder
bochs: disk: READ(10) with transfer length 0, ok
floppy io: cylinder request != current cylinder
bochs: disk: READ(10) with transfer length 0, ok
bochs: disk: READ(10) with transfer length 0, ok
floppy io: cylinder request != current cylinder
::ESC3:
::ESC1:
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
::read_virtual_checks EXCEPTION: seg=3 0:68F90 + 4
