Hello,

I've been testing various version of plex recently with no success.  They
all seem to crash just after the x-window pops up on the display.  My
system is a dual celeron running Linux 2.4.0-test10.  Does anyone know if
running plex on an SMP system works?

I'm including the error messages here.  I ran two different sessions - the
first is from running "./plex86 -f ../conf/pragma" (with 1.44_pragma386
from the FTP site in ../..), and the second is from running "./plex86 -f
../conf/freedos" (with 10M.FreeDOS from the FTP site in ../..).  Both runs
produce the same output in /var/log/messages.

Any thoughts?
-Kevin

====================== syslog errors =======================

Nov 18 12:33:06 ohio kernel: 35 monitor pages located
Nov 18 12:34:21 ohio kernel: cpu.cr0 = 0x60000010
Nov 18 12:34:21 ohio kernel: plex86: vm_t size is 67492
Nov 18 12:34:22 ohio kernel: Panic w/ abort_code=1
Nov 18 12:34:22 ohio kernel: 

====================== pragma run =======================

[ohio] /usr/src/plex/plex86/user> ./plex86 -f ../conf/pragma 
Processing command-line options
Opening VM (/dev/plex86)
Processing configuration script ../conf/pragma
Allocating 16MB of physical memory in VM
Mapping virtualized physical memory into monitor
Zeroing virtualized physical memory
Mapping monitor print buffer into user mem.
bochs: ips = 1000000
unmapped_c::init: IGNORING unmapped ports
bochs: [cmos] Setting initial clock to: Sat Nov 18 12:34:21 2000
bochs: bx_options.floppy_command_delay = 500
vga construct static
bochs: font_width = 8
bochs: font_height = 16
bochs: default_depth = 16
bochs: waiting for MapNotify
bochs: MapNotify found.
bochs: vga: interval=300000
vga init called
bochs: TTY not used, serial port is not connected
ROM: loading image '../bios/BIOS-plex86-2000_0817a' @ 0xf0000 (65536 bytes)
ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
Setting prescan depth to 3
Initializing plugins
Running VM
bochs: timer0 period set to 18 hz
bochs: CMOS: write reg 14h: value = 05h
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
Fatal monitor error caused Panic
eax:0xc2a2a
ebx:0x4c3
ecx:0xc2a00
edx:0x2ac8
ebp:0xfff8
esi:0x5987
edi:0x39
esp:0xffc0
eflags:0x202
eip:0x4f2
cs:s=0xc000, dl=0xffff, dh=0x9b0c, valid=1
ss:s=0x0, dl=0xffff, dh=0x9300, valid=1
ds:s=0x0, dl=0xffff, dh=0x9300, valid=1
es:s=0xc000, dl=0xffff, dh=0x930c, valid=1
fs:s=0x0, dl=0xffff, dh=0x9300, valid=1
gs:s=0x0, dl=0xffff, dh=0x9300, valid=1
ldtr:s=0x0, dl=0x0, dh=0x0, valid=0
tr:s=0x0, dl=0x0, dh=0x0, valid=0
gdtr:base=0x0, limit=0x0
idtr:base=0x0, limit=0x3ff
dr0:0x0
dr1:0x0
dr2:0x0
dr3:0x0
dr6:0xffff0ff0
dr7:0x400
tr3:0x0
tr4:0x0
tr5:0x0
tr6:0x0
tr7:0x0
cr0:0x60000032
cr1:0x0
cr2:0x0
cr3:0x0
cr4:0x0
inhibit_mask:0
Stack dump:
Current instruction:
 C000.000004F2  8AE8                     movb    %al, %ch

============ begin VGA text buffer dump ===============
============ end   VGA text buffer dump ===============
Shutting down plugins
bochs: Note: X11: bx_gui_c::exit() not implemented yet.
Unmapping guest physical memory.
Unmapping monitor print buffer.
Tearing down VM
Closing VM

====================== freedos run =======================

[ohio] /usr/src/plex/plex86/user> ./plex86 -f ../conf/freedos 
Processing command-line options
Opening VM (/dev/plex86)
Processing configuration script ../conf/freedos
Allocating 4MB of physical memory in VM
Mapping virtualized physical memory into monitor
Zeroing virtualized physical memory
Mapping monitor print buffer into user mem.
bochs: ips = 1000000
unmapped_c::init: IGNORING unmapped ports
bochs: [cmos] Setting initial clock to: Sat Nov 18 12:42:57 2000
bochs: Opening image for device 0
bochs: bx_options.floppy_command_delay = 500
vga construct static
bochs: font_width = 8
bochs: font_height = 16
bochs: default_depth = 16
bochs: waiting for MapNotify
bochs: MapNotify found.
bochs: vga: interval=200000
vga init called
bochs: TTY not used, serial port is not connected
ROM: loading image '../bios/BIOS-plex86-2000_0817a' @ 0xf0000 (65536 bytes)
ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
Setting prescan depth to 3
Initializing plugins
Running VM
bochs: timer0 period set to 18 hz
bochs: CMOS: write reg 14h: value = 04h
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
Fatal monitor error caused Panic
eax:0xc0000
ebx:0x4c3
ecx:0xc1500
edx:0x2ac8
ebp:0xfff8
esi:0x5994
edi:0x2c
esp:0xffc0
eflags:0x246
eip:0x4fe
cs:s=0xc000, dl=0xffff, dh=0x9b0c, valid=1
ss:s=0x0, dl=0xffff, dh=0x9300, valid=1
ds:s=0x0, dl=0xffff, dh=0x9300, valid=1
es:s=0xc000, dl=0xffff, dh=0x930c, valid=1
fs:s=0x0, dl=0xffff, dh=0x9300, valid=1
gs:s=0x0, dl=0xffff, dh=0x9300, valid=1
ldtr:s=0x0, dl=0x0, dh=0x0, valid=0
tr:s=0x0, dl=0x0, dh=0x0, valid=0
gdtr:base=0x0, limit=0x0
idtr:base=0x0, limit=0x3ff
dr0:0x0
dr1:0x0
dr2:0x0
dr3:0x0
dr6:0xffff0ff0
dr7:0x400
tr3:0x0
tr4:0x0
tr5:0x0
tr6:0x0
tr7:0x0
cr0:0x60000032
cr1:0x0
cr2:0x0
cr3:0x0
cr4:0x0
inhibit_mask:0
Stack dump:
Current instruction:
 C000.000004FE  4F                       decS    %di

============ begin VGA text buffer dump ===============
============ end   VGA text buffer dump ===============
Shutting down plugins
bochs: Note: X11: bx_gui_c::exit() not implemented yet.
Unmapping guest physical memory.
Unmapping monitor print buffer.
Tearing down VM
Closing VM

-- 
 ------------------------------------------------------------------------
 | Kevin O'Connor                     "BTW, IMHO we need a FAQ for      |
 | [EMAIL PROTECTED]            'IMHO', 'FAQ', 'BTW', etc. !"    |
 ------------------------------------------------------------------------

Reply via email to