Hi there,
Thought I'd give BeOS a try as you managed to boot QNX up.
It flashes the bootup icons after a while, however plex86 died in the
end.
Thought you might be interested in the crash log:
-- crashing log --
:plex86 panic:
::MOV_RdCd: CR4
Fatal monitor error caused Panic
eax:0x10
ebx:0x2000
ecx:0x17ad00
edx:0x2e4000
ebp:0xfffbdc
esi:0x1ace60
edi:0x45e428
esp:0xfff9b0
eflags:0x46
eip:0x159e44
cs:s=0x8, dl=0xffff, dh=0xcf9a00, valid=1
ss:s=0x10, dl=0xffff, dh=0xcf9300, valid=1
ds:s=0x10, dl=0xffff, dh=0xcf9200, valid=1
es:s=0x10, dl=0xffff, dh=0xcf9300, valid=1
fs:s=0x20, dl=0xffff, dh=0x9301, valid=1
gs:s=0x28, dl=0xffff, dh=0x9307, valid=1
ldtr:s=0x0, dl=0x0, dh=0x0, valid=0
tr:s=0x0, dl=0x0, dh=0x0, valid=0
gdtr:base=0x1873a0, limit=0x2f
idtr:base=0x7f000, limit=0x7ff
dr0:0x0
dr1:0x0
dr2:0x0
dr3:0x0
dr6:0xffff0ff0
dr7:0x400
tr3:0x0
tr4:0x0
tr5:0x0
tr6:0x0
tr7:0x0
cr0:0x40033
cr1:0x0
cr2:0x0
cr3:0x0
cr4:0x0
inhibit_mask:0
Stack dump:
Current instruction:
0008.00159E44 0F20E0 movl %cr4, %eax
-- crashing log, end --
Seems like touching CR4 is not allowed, right?
--
Mikael J @ http://hem.spray.se/tic_khr
Registered and Proud BeOS Developer
