Hi, I succesfully booted GRUB 0.5.96.1. I was not able to produce a disk image it would accept, but using the hard disk device files directly worked. So I am currently thinking that this is not plex-related. I tried to boot GNU Mach (-> GNU/Hurd), but it crashed when trying to enable FPE. After disabling that, plex86 crashed with a segmentation fault after panic'ing. Thanks, Marcus bash-2.04$ ./plex86 -f ../../g.conf Processing command-line options Opening VM (/dev/plex86) Processing config file ../../g.conf... Allocating 8MB of physical memory in VM Mapping virtualized physical memory into monitor Zeroing virtualized physical memory Mapping monitor print buffer into user mem. bochs: ips = 1000000 unmapped_c::init: IGNORING unmapped ports bochs: [cmos] Setting initial clock to: Mon Dec 11 03:05:01 2000 bochs: Opening image for device 0 bochs: bx_options.floppy_command_delay = 500 vga construct static bochs: font_width = 8 bochs: font_height = 16 bochs: default_depth = 16 bochs: waiting for MapNotify bochs: MapNotify found. bochs: vga: interval=200000 vga init called bochs: TTY not used, serial port is not connected ROM: loading image '../bios/BIOS-plex86-2000_0817a' @ 0xf0000 (65536 bytes) ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes) Setting prescan depth to 3 prescan on Processed 62 lines of config file '../../g.conf' Initializing plugins Running VM bochs: timer0 period set to 18 hz bochs: CMOS: write reg 14h: value = 05h bochs: vga: io write: 3cf: reg 05: value = 10h bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync bochs: *** io read 3c5 case 1: sequencer clocking mode bochs: vga: io write 3c0: address mode reg=16 bochs: vga: io write 3c0: address mode reg=17 bochs: vga: io write 3c0: address mode reg=18 bochs: vga: io write 3c0: address mode reg=19 bochs: vga: io write 3c0: address mode reg=20 bochs: update(): color text mode: mem map is 1 bochs: *** io read 3c5 case 1: sequencer clocking mode bochs: vga: io write: 3cf: reg 05: value = 10h bochs: *** io read 3c5 case 1: sequencer clocking mode floppy io: cylinder request != current cylinder floppy io: cylinder request != current cylinder floppy io: cylinder request != current cylinder bochs: vga: io write: 3cf: reg 05: value = 10h bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync bochs: *** io read 3c5 case 1: sequencer clocking mode bochs: vga: io write 3c0: address mode reg=16 bochs: vga: io write 3c0: address mode reg=17 bochs: vga: io write 3c0: address mode reg=18 bochs: vga: io write 3c0: address mode reg=19 bochs: vga: io write 3c0: address mode reg=20 bochs: *** io read 3c5 case 1: sequencer clocking mode bochs: vga: io write: 3cf: reg 05: value = 10h bochs: *** io read 3c5 case 1: sequencer clocking mode bochs: floppy: DMA and interrupt capabilities disabled bochs: floppy: DMA and interrupt capabilities disabled ::ESC3: ::ESC7: ::ESC1: bochs: CV=6b8f bochs: CV=6b8f bochs: CV=6b2b bochs: CV=6b2b ::plex86 panic: ::exception: 3rd exception with no resolution Fatal monitor error caused Panic eax:0x0 ebx:0x117ffc ecx:0x1d7bf9c edx:0x18 ebp:0x1d7bfd8 esi:0x0 edi:0x0 esp:0x0 eflags:0x10002 eip:0x13d165 cs:s=0x10, dl=0x1fd, dh=0xc0c09a00, valid=1 ss:s=0x18, dl=0xffff, dh=0xc0cf9300, valid=1 ds:s=0x18, dl=0xffff, dh=0xc0cf9300, valid=1 es:s=0x18, dl=0xffff, dh=0xc0cf9300, valid=1 fs:s=0x0, dl=0xffff, dh=0xcf9300, valid=0 gs:s=0x0, dl=0xffff, dh=0xcf9300, valid=0 ldtr:s=0x58, dl=0xf360001f, dh=0xc0008228, valid=1 tr:s=0x8, dl=0xdfc00067, dh=0xc0008928, valid=1 gdtr:base=0xc028ed00, limit=0x7f idtr:base=0xc028e0e0, limit=0x7ff dr0:0xc026b000 dr1:0x0 dr2:0x0 dr3:0x0 dr6:0xffff0ff0 dr7:0xf0602 tr3:0x0 tr4:0x0 tr5:0x0 tr6:0x0 tr7:0x0 cr0:0xe0010037 cr1:0x0 cr2:0xbffffffc cr3:0x296000 cr4:0x0 inhibit_mask:0 Segmentation fault bash-2.04$ �Script� beendet: Mon Dec 11 03:05:25 2000 -- `Rhubarb is no Egyptian god.' Debian http://www.debian.org [EMAIL PROTECTED] Marcus Brinkmann GNU http://www.gnu.org [EMAIL PROTECTED] [EMAIL PROTECTED] http://www.marcus-brinkmann.de
