Hi,
I have sucessfully installed plex86 and I can see the bios starting.
Unfortunately I get error messages. Please give me a short description how
to log the messages to a file ( plex86...... >file, doesn't work) easily.
I tried it within KDE 1.12.
plex report this
Processing command-line options Opening VM (/dev/plex86)
Processing config
file ../conf/msdos...
Allocating 4MB of physical memory in VM Mapping
virtualized physical memory into monitor
Zeroing virtualized physical
memory Mapping monitor print buffer into user mem.
bochs: ips = 1000000
unmapped_c::init: IGNORING unmapped ports bochs: [cmos]
Setting initial clock to: Mon Jan 1 13:49:42 2001
bochs: Opening image for device 0
bochs: bx_options.floppy_command_delay = 500 vga construct static
bochs: font_width = 8 bochs: font_height = 16
bochs: default_depth = 16
bochs: waiting for MapNotify
bochs: MapNotify found.
bochs: vga: interval=200000 vga init called
bochs: TTY not used, serial port is not connected
ROM: loading image '../bios/BIOS-plex86-current' @ 0xf0000 (65536 bytes)
ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
Setting prescan depth to 3 prescan on Processed 62 lines of config file
'../conf/msdos'
Initializing plugins Running VM bochs: timer0 period set
to 18 hz
bochs: CMOS: write reg 14h: value = 05h
bochs: vga: io write:
3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl
& vert sync bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs:
vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
bochs: update(): color text mode: mem map is 1
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: *** io read 3c5 case 1: sequencer clocking mode
::plex86 panic:
::sbe: guest EIP > CS.limit Fatal monitor error caused
Panic eax:0xd0053 ebx:0x7c00 ecx:0xd0001 edx:0x0 ebp:0xfff8 esi:0x0
edi:0x500 esp:0xc eflags:0x7006 eip:0x10002 cs:s=0xff53, dl=0xf530ffff,
dh=0x9b0f, valid=1 ss:s=0x0, dl=0xffff, dh=0x9300, valid=1 ds:s=0xff53,
dl=0xf530ffff, dh=0x930f, valid=1 es:s=0x0, dl=0xffff, dh=0x9300, valid=1
fs:s=0x0, dl=0xffff, dh=0x9300, valid=1 gs:s=0x0, dl=0xffff, dh=0x9300,
valid=1 ldtr:s=0x0, dl=0x0, dh=0x0, valid=0 tr:s=0x0, dl=0x0, dh=0x0,
valid=0 gdtr:base=0x0, limit=0x0 idtr:base=0x0, limit=0x3ff dr0:0x0
dr1:0x0 dr2:0x0 dr3:0x0 dr6:0xffff0ff0 dr7:0x400 tr3:0x0 tr4:0x0 tr5:0x0
tr6:0x0 tr7:0x0 cr0:0x60000032 cr1:0x0 cr2:0x0 cr3:0x0 cr4:0x0
inhibit_mask:0 Stack dump: Current instruction:
FF53.00010002 0000 addb %al, (%bx,%si)
Shutting down plugins bochs: Note: X11: bx_gui_c::exit() not implemented
yet. Unmapping guest physical memory. Unmapping monitor print buffer.
Tearing down VM
Closing VM
Regards,
Stefan Beck
http://www.geocities.com/stefan_beck_xyz/astro
"Astrophotography with small telescopes"
http://www.geocities.com/stefan_beck_xyz/os2
"Informationen zu OS/2, warum OS/2 ?"
You need a real OS ? Take OS/2
This OS/2 system uptime is 0d 0h 15m 01s 460ms (en).
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
