Sorry for the double post. I sent this to the listserv a month go but had forgotten to register, so I never recieived any response and assumed it wasn't posted. But I did add a couple questions, so if you wouldn't mind... ;-) Thank you! ~Christopher On 06 Mar 2001 23:08:52 -0500, Christopher Meredith wrote: > First of all, I want to tell you that my jaw dropped to the floor when I > ran Plex86 the first time. Seeing that familiar DOS boot screen was just > incredible. I've figured out how to partition and format the "drive" and > I've even attempted to install Windows on it. After playing with it, I > have some questions. > > 1) Can I allocate any more than 32MB of RAM to Plex86? > > 2) Can Plex86 boot from the HD image created, rather than a floppy disk? > Do you simply specify the HD image as the boot image as well? > > 3) Is there a way to get Plex86 to boot an existing installation of > Windows on another physical drive? > > I used the FreeDOS boot image to partition and format the "drive" then > used a Win98 boot disk to enable CD-ROM support and ran setup from a > WinME CD. It runs scandisk fine, but seems to hang at the finished w/ > scandisk screen. > > 4) How do I install a Windows envorinment for Plex86 to run if not from > a Win CD? > > 5) I tried a trial of VMware and when attempting to install WinME it > said that it could be ne installed because my processor was under 150 > mhz. Will I run into this problem? > > 6) What Windows environment would you recommend I use? > > 7) What performance tweaks can you recommend to get the VM to run any > faster? > > Thanks so much in advance! >
