> You have two possibilities: either you rebuild your kernel with module
> symbol versioning switched off...
That did the trick, many thanks. The module now loads correctly, using the
supplied Caldera kernel.
Onto the next issue. plex86 fails to load with the attached error.
> Bye,
> Ulrich
-Nigel
Processing command-line options
Opening VM (/dev/plex86)
Processing config file ../conf/win95...
Allocating 16MB of physical memory in VM
Mapping virtualized physical memory into monitor
Zeroing virtualized physical memory
Mapping monitor print buffer into user mem.
bochs: ips = 1000000
unmapped_c::init: IGNORING unmapped ports
bochs: [cmos] Setting initial clock to: Mon Mar 26 17:38:00 2001
bochs: Opening image for device 0
bochs: bx_options.floppy_command_delay = 500
vga construct static
bochs: font_width = 8
bochs: font_height = 16
bochs: default_depth = 24
bochs: waiting for MapNotify
bochs: MapNotify found.
bochs: vga: interval=200000
vga init called
bochs: TTY not used, serial port is not connected
ROM: loading image '../bios/BIOS-plex86-current' @ 0xf0000 (65536 bytes)
ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
Setting prescan depth to 3
prescan on
Processed 63 lines of config file '../conf/win95'
Initializing plugins
Memory: 16
Text address: 0x0
Stack address: 0x0
Running VM
bochs: timer0 period set to 18 hz
bochs: CMOS: write reg 14h: value = 04h
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
bochs: update(): color text mode: mem map is 1
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: *** io read 3c5 case 1: sequencer clocking mode
::plex86 panic:
::default case on i.b1 of 0xCE, reason=0x1
Fatal monitor error caused Panic
eax:0x42
ebx:0x8200
ecx:0x110000
edx:0x0
ebp:0x7c00
esi:0xefd2
edi:0x2
esp:0x7bf0
eflags:0x7
eip:0xffa4
cs:s=0x0, dl=0xffff, dh=0x9b00, valid=1
ss:s=0x0, dl=0xffff, dh=0x9300, valid=1
ds:s=0x0, dl=0xffff, dh=0x9300, valid=1
es:s=0x0, dl=0xffff, dh=0x9300, valid=1
fs:s=0x0, dl=0xffff, dh=0x9300, valid=1
gs:s=0x0, dl=0xffff, dh=0x9300, valid=1
ldtr:s=0x0, dl=0x0, dh=0x0, valid=0
tr:s=0x0, dl=0x0, dh=0x0, valid=0
gdtr:base=0x0, limit=0x0
idtr:base=0x0, limit=0x3ff
dr0:0x0
dr1:0x0
dr2:0x0
dr3:0x0
dr6:0xffff0ff0
dr7:0x400
tr3:0x0
tr4:0x0
tr5:0x0
tr6:0x0
tr7:0x0
cr0:0x60000032
cr1:0x0
cr2:0x0
cr3:0x0
cr4:0x0
inhibit_mask:0
Stack dump:
Current instruction:
0000.0000FFA4 CE into
Shutting down plugins
bochs: Note: X11: bx_gui_c::exit() not implemented yet.
Unmapping guest physical memory.
Unmapping monitor print buffer.
Tearing down VM
Closing VM
