Hello,
I've made preliminar debian packages for Plex86:
http://elvin.ddts.net:8086/~jtarrio/plex/
These are source packages and only are intended for debian developers,
please read carefully the instructions contained in the README_FIRST.
You'll need the LGPL VGA BIOS packages, take them from:
http://people.debian.org/~jsogo/plex86/
Please report any bugs you may find to my email address.
If you are not a debian developer, please refrain from using
them, they haven't been tested enough yet. Official packages
will probably appear in Sid in two or three weeks.
I also happen to get this error when attempting to run Plex86
(both the normal CVS snapshot and my packaged version), if you're
trying this package and get the same error, don't report it to me.
Some help regarding this error would be very appreciated, i can't
upload my packages to debian untill this error has been solved:
------------------------------------------------
Processing command-line options
Opening VM (/dev/plex86)
Processing config file ../conf/freedos...
Allocating 4MB of physical memory in VM
Mapping virtualized physical memory into monitor
Zeroing virtualized physical memory
Mapping monitor print buffer into user mem.
bochs: [cmos] Setting initial clock to: Wed Sep 5 00:01:16 2001
bochs: font_width = 8
bochs: font_height = 16
bochs: default_depth = 24
bochs: waiting for MapNotify
bochs: MapNotify found.
bochs: vga: interval=400000
bochs: TTY not used, serial port is not connected
bochs: bx_options.floppy_command_delay = 500
bochs: Opening image for device 0
ROM: loading image '../bios/BIOS-plex86-current' @ 0xf0000 (65536 bytes)
ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
Setting prescan depth to 3
prescan on
Processed 76 lines of config file '../conf/freedos'
Initializing plugins
Running VM
::init_monitor OK -----------------
nexus_size = 0x24E
bochs: CMOS: write reg 14h: value = 05h
::sysIOOut: No handler defined for port 0x46E8!.
::sysIOOut: No handler defined for port 0x102!.
::sysIOOut: No handler defined for port 0x4AE8!.
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: *** io read 3c5 case 1: sequencer clocking mode
::plex86 panic:
::default case on i.b1 of 0xCE
Fatal monitor error caused Panic
eax:0x1
ebx:0x7c00
ecx:0x1
edx:0x80
ebp:0xfff8
esi:0x0
edi:0x501
esp:0xfffc
eflags:0x86
eip:0xffa4
cs:s=0x0, dl=0xffff, dh=0x9b00, valid=1
ss:s=0x0, dl=0xffff, dh=0x9300, valid=1
ds:s=0x0, dl=0xffff, dh=0x9300, valid=1
es:s=0x0, dl=0xffff, dh=0x9300, valid=1
fs:s=0x0, dl=0xffff, dh=0x9300, valid=1
gs:s=0x0, dl=0xffff, dh=0x9300, valid=1
ldtr:s=0x0, dl=0x0, dh=0x0, valid=0
tr:s=0x0, dl=0x0, dh=0x0, valid=0
gdtr:base=0x0, limit=0x0
idtr:base=0x0, limit=0x3ff
dr0:0x0
dr1:0x0
dr2:0x0
dr3:0x0
dr6:0xffff0ff0
dr7:0x400
tr3:0x0
tr4:0x0
tr5:0x0
tr6:0x0
tr7:0x0
cr0:0x60000032
cr1:0x0
cr2:0x0
cr3:0x0
cr4:0x0
inhibit_mask:0
Stack dump:
Current instruction:
0000.0000FFA4 CE into
Shutting down plugins
bochs: Note: X11: bx_gui_c::exit() not implemented yet.
Unmapping guest physical memory.
Unmapping monitor print buffer.
Tearing down VM
Closing VM
-----------------------------------------------------
Regards,
--------------------------------------------------
Robert Millan Debian GNU (Hurd) user
zeratul2 wanadoo es http://getyouriso.org/
--------------------------------------------------
GPG ID C8D6942C
237F 8688 C2E5 BC64 E152 97B4 FB28 D41B C8D6 942C
--------------------------------------------------
