Hello!
After commenting the bochs-init parameter, i'm still unable to boot GNU/Linux (although FreeDOS works fine). I'm using the Debian installation boot floppy which can be found at ftp://ftp.debian.org/debian/dists/potato/main/disks-i386/current/images-1.44/root.bin Here's an error log: ---------------------------------- Processing command-line options Opening VM (/dev/plex86) Processing config file /etc/plex86/gnu-linux... Allocating 8MB of physical memory in VM Mapping virtualized physical memory into monitor Zeroing virtualized physical memory Mapping monitor print buffer into user mem. ROM: loading image '/usr/lib/plex86/bios/rombios.bin' @ 0xf0000 (65536 bytes) ROM: loading image '/usr/share/vgabios/vgabios.bin' @ 0xc0000 (23124 bytes) Setting prescan depth to 3 prescan on Processed 61 lines of config file '/etc/plex86/gnu-linux' Initializing plugins Running VM ::init_monitor OK ----------------- nexus_size = 0x24E ::sysIOOut: No handler defined for port 0x70!. ::sysIOIn: No handler defined for port 0x71. ::sysIOOut: No handler defined for port 0x71!. ::plex86 panic: ::emulate:1 default case of 5 Fatal monitor error caused Panic eax:0x0 ebx:0x0 ecx:0x0 edx:0x0 ebp:0x0 esi:0x0 edi:0x0 esp:0x1a eflags:0x46 eip:0xa0000 cs:s=0x0, dl=0xffff, dh=0x9b00, valid=1 ss:s=0x0, dl=0xffff, dh=0x9300, valid=1 ds:s=0x0, dl=0xffff, dh=0x9300, valid=1 es:s=0x0, dl=0xffff, dh=0x9300, valid=1 fs:s=0x0, dl=0xffff, dh=0x9300, valid=1 gs:s=0x0, dl=0xffff, dh=0x9300, valid=1 ldtr:s=0x0, dl=0x0, dh=0x0, valid=0 tr:s=0x0, dl=0x0, dh=0x0, valid=0 gdtr:base=0x0, limit=0x0 idtr:base=0x0, limit=0x3ff dr0:0x0 dr1:0x0 dr2:0x0 dr3:0x0 dr6:0xffff0ff0 dr7:0x400 tr3:0x0 tr4:0x0 tr5:0x0 tr6:0x0 tr7:0x0 cr0:0x60000032 cr1:0x0 cr2:0x0 cr3:0x0 cr4:0x0 inhibit_mask:0 Stack dump: Current instruction: 0000.000A0000 0000 addb %al, (%bx,%si) Shutting down plugins bochs: Note: X11: bx_gui_c::exit() not implemented yet. Unmapping guest physical memory. Unmapping monitor print buffer. Tearing down VM Closing VM -------------------------------- My configuration file is almost default with few minor modifications: #################################################################### # This is an example plex86 configuration file #################################################################### #################################################################### # Memory settings #################################################################### # number of megabytes for vm memory = 8 #################################################################### # Plugins #################################################################### plugin = /etc/plex86/user/plugins/bochs/plugin-bochs.so bochs-opt boot: a,c #bochs-opt floppya: 1_44=./.plex86/gnu-linux.fd0, status=inserted bochs-opt diskc: file=./.plex86//gnu-linux.hd0, cyl=1024, heads=16, spt=63 bochs-opt keyboard_serial_delay: 200 bochs-opt floppy_command_delay: 500 bochs-opt vga_update_interval: 300000 bochs-opt mouse: enabled=0 bochs-opt private_colormap: enabled=0 bochs-opt i440fxsupport: enabled=0 bochs-opt newharddrivesupport: enabled=1 bochs-opt ips: 1000000 bochs-opt time0: 938581955 #bochs-init # The system BIOS load-rom: file=/usr/lib/plex86/bios/rombios.bin, address=0xf0000 # The VGA BIOS load-rom: file=/usr/share/vgabios/vgabios.bin, address=0xc0000 #################################################################### # Debugging settings #################################################################### # syntax for disassembly db_syntax = at&t #################################################################### # VM tweaks #################################################################### # Maximum depth that the scan-before-execute code will try # to recursively prescan code in the current code page, by # following intra-page branches. prescan: depth = 3, ring3 = on #################################################################### # end of config file #################################################################### Thanks very much! -- ---------------------------------------------------- Robert Millan Debian GNU/Hurd user zeratul2 wanadoo es http://getyouriso.dyndns.org/ ---------------------------------------------------- Join us in civil disobedience and distribute DeCSS!! ---------------------------------------------------- /* efdtt.c Author: Charles M. Hannum <[EMAIL PROTECTED]> */ /* Length: 434 bytes (excluding unnecessary newlines) */ /* Usage is: cat title-key scrambled.vob | efdtt >clear.vob */ /* title-key can be read from the DVD by css-auth. (see livid.org) */ #define m(i)(x[i]^s[i+84])<< unsigned char x[5],y,s[2048];main(n){for(read(0,x,5);read(0,s,n=2048);write(1,s ,n))if(s[y=s[13]%8+20]/16%4==1){int i=m(1)17^256+m(0)8,k=m(2)0,j=m(4)17^m(3)9^k *2-k%8^8,a=0,c=26;for(s[y]-=16;--c;j*=2)a=a*2^i&1,i=i/2^j&1<<24;for(j=127;++j<n ;c=c>y)c+=y=i^i/8^i>>4^i>>12,i=i>>8^y<<17,a^=a>>14,y=a^a*8^a<<6,a=a>>8^y<<9,k=s [j],k="7Wo~'G_\216"[k&7]+2^"cr3sfw6v;*k+>/n."[k>>4]*2^k*257/8,s[j]=k^(k&k*2&34) *6^c+~y;}}
