cd zinstance sudo ./bin/buildout buildout assumes you're working in the correct current directory unless you give it an argument to specify which buildout file to use.
On Mon, Feb 11, 2013 at 3:06 PM, Ahmed Hussein <[email protected]> wrote: > Plone is running and accessible. It is the addon through buildout that is > causing the problem now. > > The commands I used: > > sudo zinstance/bin/buildout > sudo -u plone zinstance/bin/buildout > > and both give me: > While: > Initializing. > Error: Couldn't open /Applications/Plone/buildout.cfg > > Ahmed Hussein > -------------------------------------------------------------------------- > Make it simple, as simple as possible but no simpler. > > (Albert Einstein) > > > > > On 2013-02-11, at 1:01 PM, Nathan Van Gheem <[email protected]> wrote: > > > and what is the actual command you're running? > > > > > > On Mon, Feb 11, 2013 at 2:59 PM, Ahmed Hussein <[email protected]> wrote: > > Yes I tried both and still buildout.cfg can not be be opened. > > > > My first attempt was with mac installer, and it did not work. > > > > > > Ahmed Hussein > > > -------------------------------------------------------------------------- > > Make it simple, as simple as possible but no simpler. > > > > (Albert Einstein) > > > > > > > > > > On 2013-02-11, at 12:53 PM, Nathan Van Gheem <[email protected]> wrote: > > > > > Did you try sudo? > > > > > > Or better, sudo -u plone since you're running as the plone user? > > > > > > I would recommend you use the mac installer--it's better for novices. > > > > > > > > > On Mon, Feb 11, 2013 at 2:33 PM, Ahmed Hussein <[email protected]> > wrote: > > > Thank you Karl. > > > > > > Actually I did not. However, it turned out that my problem was that I > was running a server using MAMP. I turned MAMP off and reverted to the > native server provided by OSX, and that helped. Another part of the problem > was that I did not run zinstance/bin/instance fg right after installing > Plone. This step is not mentioned in the installation instruction. I got a > hint about it from a previous message. Now I have Plone running and > accessible, but when I tried an addon I got an error saying: > > > While: > > > Initializing. > > > Error: Couldn't open /Applications/Plone/buildout.cfg > > > > > > I tried to make buildout.cfg accessible by the Plone user, but I could > not. So I am stuck with this snag. > > > > > > Ahmed Hussein > > > > -------------------------------------------------------------------------- > > > Make it simple, as simple as possible but no simpler. > > > > > > (Albert Einstein) > > > > > > > > > > > > > > > On 2013-02-11, at 4:00 AM, [email protected] wrote: > > > > > > > Message: 3 > > > > Date: Sun, 10 Feb 2013 21:58:27 -0800 (PST) > > > > From: Karl Johan Kleist <[email protected]> > > > > To: [email protected] > > > > Subject: Re: [Setup] Plone 4.2.4 would not start on Mac OSX10.8.2 > > > > Message-ID: <[email protected]> > > > > Content-Type: text/plain; charset=us-ascii > > > > > > > > If you changed the port number in a .cfg file, did you also remember > to run > > > > buildout? > > > > > > > > > > _______________________________________________ > > > Setup mailing list > > > [email protected] > > > https://lists.plone.org/mailman/listinfo/plone-setup > > > > > > > > >
_______________________________________________ Setup mailing list [email protected] https://lists.plone.org/mailman/listinfo/plone-setup
