[Ver.1.06] - The failure (suspension during operation) in installing Windows 10 November update (1511) environment has been resolved.
[Ver.1.05] - Windows 10 has been added as a supported OS. - Windows 8.1 has been added as a supported OS. - Windows 8 has been added as a supported OS. [Ver.1.04] Scanner Driver: - The detection accuracy of the media size when scanning from the ADF has been improved. [Ver.1.03] IJ Scan Utility: - The operation of the printer's communication timer is optimized on the printer driver. [Ver.1.02] Printer Driver: - The following problem has been rectified: When cancelling the print job in collated printing multiple numbers of copies, the print job may not be deleted. Scanner Driver: - The problem that an error may occur at the MP Driver installation in rare cases has been rectified. [Ver.1.01] Printer Driver: - The problem in the Arabic environment has been rectified. canon mx350 printer driver free download *Download File* https://t.co/nraKDrbwz2 Printer Driver: 1.[Windows 10] Some of the settings (such as borderless printing) in the OS standard print settings screen are not valid. the settings in the Printer printing Preferences window are valid. Make settings in Printer printing Preferences when necessary. 2.[Windows 10] Layout printing from the OS standard print settings screen may not be performed as expected in Some instances. In such cases, open the Printer Printing Preferences window and change the paper size accordingly. 3.With Internet Explorer 11, a web site containing Japanese may not be printed properly. In Windows Update, update the OS and Internet Explorer to the latest version. Scanner Driver: 1.If the OS is upgraded with the scanner driver remained installed, scanning by pressing the SCAN button on the Printer may not be performed After the upgrade. in such cases, re-install the scanner driver. IJ Network Tool: 1. In the environment where the Firewall software operates, as the printer detection using LAN communication is inhibited, the setup may not be competed. Preventive action: Disable the Firewall setting temporarily, or close the Firewall software, then, perform the setup. In each case, disconnect the network from the Internet first. 2. When using of IJ Network Tool under Windows Vista 64bit version, the following message may be displayed at the setup:New Port could not be created. Preventive action: Cancel the setup once, then retry the setup after restarting the computer. Before connecting a computer to the printer and start printing with the method below, complete setup for wireless LAN (via a wireless router) using the Setup CD-ROM or from our website (canon.com/ijsetup). Gutenprint 5.3.3 is released! August 25, 2019 - The Gutenprint project is pleased to announce Gutenprint 5.3.3, the first stable release of Gutenprint 5.3. This package is 64-bit only.*NOTE: Users of many dye sublimation printers must follow a special installation procedure. Please read the release notes very carefully!* See the Release notes for more detail. See the *Downloads* section for download links. Gutenprint 5.2.15 is released! June 12, 2019 - The Gutenprint project is pleased to announce Gutenprint 5.2.15, the final planned release of Gutenprint 5.2. Future releases will be based on Gutenprint 5.3. This release fixes a problem with dye sublimation printers not functioning, restores the uninstaller, and should fix some other issues on OS X. As of this release, this package is 64-bit only.*NOTE: Users of many dye sublimation printers must follow a special installation procedure. Please read the release notes very carefully!* See the Release notes for more detail. See the *Downloads* section for download links. Gutenprint 5.2.14 is released! May 17, 2018 - The Gutenprint project is pleased to announce Gutenprint 5.2.14, a stable release Gutenprint 5.2. This release adds full color support for most color laser printers, fixes some important bugs, adds support for additional printers, and offers improvements for others. *NOTE: Users of many dye sublimation printers must follow a special installation procedure. Please read the release notes very carefully!* See the Release notes for more detail. See the *Downloads* section for download links. Gutenprint 5.2.13-pre1 is released! May 23, 2017 - The Gutenprint project is pleased to announce Gutenprint 5.2.13-pre1, a pre-release of Gutenprint 5.2.13. This release fixes some important bugs, adds support for additional printers, and offers improvements for others. *NOTE: Users of many dye sublimation printers must follow a special installation procedure. Please read the release notes very carefully!* See the Release notes for more detail. See the *Downloads* section for download links. Gutenprint 5.2.12 is released! January 19, 2017 - The Gutenprint project is pleased to announce Gutenprint 5.2.12, a stable release of Gutenprint 5.2. This release adds support for many new printers and other improvements over 5.2.11. *NOTE: Users of many dye sublimation printers must follow a special installation procedure. Please read the release notes very carefully!* See the Release notes for more detail. See the *Downloads* section for download links. Gutenprint 5.2.11 is released! January 22, 2016 - The Gutenprint project is pleased to announce Gutenprint 5.2.11, a stable release of Gutenprint 5.2. This release provides full support for OS X 10.11 (El Capitan). This release adds support for many new printers and other improvements over 5.2.10, but no longer supports OS X 10.5 or below. *NOTE: Users of many dye sublimation printers must follow a special installation procedure. Please read the release notes very carefully!* See the Release notes for more detail. See the *Downloads* section for download links. Gutenprint 5.2.10 is released! May 20, 2014 - The Gutenprint project is pleased to announce Gutenprint 5.2.10, a stable release of 5.2. This release adds support for many new printers and other improvements over 5.2.9, but no longer supports OS X 10.3 or 10.4. *NOTE: Users of many dye sublimation printers must follow a special installation procedure. Please read the release notes very carefully!* See the Release notes for more detail. See the *Downloads* section for download links. Gimp-Print 4.2.7 is the last stable release of Gimp-Print version 4.2.x for Mac OS X; it includes 225 drivers supporting over 600 printers. The disk-image file includes an OS X installer package, an uninstaller package, plus illustrated documentation to easily guide you through the printer set-up process. (source code) *Gutenprint 5.2.8* is a stable release of Gutenprint 5.2 The Canon driver has been significantly overhauled for this release, and output (and in some cases functionality) may be significantly different from previous releases. We expect to perform further work in future releases. Also, an additional eighteen new Epson printers has been added. For all the specific changes, please see the release notes. Please note that as of 5.0.0-beta1 the behavior of the Mac OS X installer has changed. The installer will now permit Gimp-Print 4.2.x and Gimp-Print 5.0 to be installed simultaneously, so that printer queues may be created using either driver. If you do not wish to retain your existing installation of Gimp-Print 4.2.x simply click on the *Customize* button available on the last screen of the installer and check the box for "Gimp-Print 4.2.x Uninstaller" Please also note that this release of the installer will update any existing 4.2.x printer queue for use with 5.0. If you wish to continue using Gimp-Print 4.2.x after installing 5.0 you will need to manually create a new printer queue, or use Print Center/Printer Setup Utility to change the driver. If you would like to comment on this installer behavior please send a polite note to the Gimp-Print developer mailing list! The predecessor to this software package (the original Print plugin for the GIMP) was first written by Michael Sweet of Easy Software Products and initially worked only as a print plugin to the GIMP (GNU Image Manipulation Program). In the summer of 1999, I purchased an Epson Stylus Photo EX printer to feed my photography hobby. Finding no existing printer drivers, I adapted Mike's GIMP Print plugin to this six-color printer, and by the end of the year released version 3.0 of the Gimp-Print software, which was included in version 1.1 of the GIMP. The intention was for this to be the stable plugin in version 1.2 of the GIMP while development of the GIMP Print plugin continued for later release. I put the Gimp-Print development tree on SourceForge starting with version 3.1, and quickly found a group of like-minded people who wanted to print high quality output on inexpensive inkjet printers. One of the main goals, which was not expected to be met until late in the version 3.1 cycle, was to write a Ghostscript driver so that printing would not be restricted to the GIMP. Much to my surprise, someone wrote one within days! That gave me my first clue that the project was destined for greater things. The Gimp-Print 4.2 release proved to be far more successful than we ever imagined. First of all, it was wonderfully stable from the outset; it was to be over 4 months before we needed to release an update. We added one major new feature shortly after release, support for the new Ghostscript driver architecture based on HP's HPIJS driver. This driver architecture allowed drivers to be compiled independently of Ghostscript (previously drivers had to be compiled into Ghostscript, a somewhat daunting project for end users). We continued to add more printers, dither algorithms, and so forth, all without breaking compatibility with the initial 4.2.0 release. eebf2c3492 -- You received this message because you are subscribed to the Google Groups "Plover" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ploversteno/83d06b59-c27d-4376-b61f-daafccdb80den%40googlegroups.com.
