Hi Alan,
The tarball indicates that the command "plplot_octave" was not found. Could it be that the subdirectory "dll" needs to be added to the LD_LIBRARY_PATH environment variable or perhaps to the PATH variable? I have not spent that much time on figuring this out - running the examples by hand was unsuccessful in a completely different way, but that is my ignorance regarding Octave (complaints about x00c not being the function file name ""). Regards, Arjen From: Arjen Markus [mailto:arjen.mar...@deltares.nl] Sent: Friday, July 10, 2015 8:41 AM To: plplot-devel@lists.sourceforge.net Subject: Re: [Plplot-devel] Comprehensive testing on Cygwin with Tcl/Tk/Itcl/Itk Hi Alan, > -----Original Message----- > From: Alan W. Irwin [mailto:ir...@beluga.phys.uvic.ca] > Sent: Thursday, July 09, 2015 10:30 AM > To: Arjen Markus; Orion Poplawski > Cc: plplot-devel@lists.sourceforge.net > Subject: RE: [Plplot-devel] Comprehensive testing on Cygwin with > Tcl/Tk/Itcl/Itk > > Hi Arjen: > > First a comment about your Cygwin setup. > > The cmake.out file revealed (as you mentioned in your first message) that you > are > having trouble with X. That sounds like exactly the same problem that you > intermittently had before. Is it possible installation of _any_ software on > Cygwin > means you have to go through the whole X initialization procedure again? And > if that > proves to be the case I hope you can automate that procedure so these > intermittent > troubles with X disappear. > No, my script to start the comprehensive tests first starts the X Window server. When I leave out Octave, it all goes well, but with Octave I see that CMake does not continue after printing where it found Octave. I suspect something is waiting for input, but I do not yet have a clue what. As yesterday was my day to travel home, I did not have an opportunity to dig into it. So, instead I tried it without the X server running - this was just a lucky guess. And then I ran into the ctest problems. > On 2015-07-09 05:42-0000 Arjen Markus wrote: > > > The Octave tests failed in the ctest step as you can see in the > tarball. I have not found any indication as to why to it failed though. > > Thanks for that report. > > The cmake.out results for finding Octave-3 look good. > And it appears there was no build error on Cygwin with our > Octave(-3) binding enabled which is good. > > Of course, as you stated there is an obvious run-time error with Octave on > that > platform, and ctest is not very informative about the details of that error. > So I > suggest you add the script options > > --do_ctest no --build_command "make" > > which will skip the uninformative ctest phase and also keep the build > non-parallel > when building the test_noninteractive target (which is the first thing done > by the > comprehensive test script if ctest is skipped). > > When the comprehensive test script builds that target it should run into the > same > octave run-time errors as ctest only it will do that verbosely and also in a > non-parallel > way which will show up in the report tarball to help me to diagnose exactly > what is > wrong with the octave component on Cygwin. > Okay, that is quite doable. I will start the tests that way rightaway. Regards, Arjen DISCLAIMER: This message is intended exclusively for the addressee(s) and may contain confidential and privileged information. If you are not the intended recipient please notify the sender immediately and destroy this message. Unauthorized use, disclosure or copying of this message is strictly prohibited. The foundation 'Stichting Deltares', which has its seat at Delft, The Netherlands, Commercial Registration Number 41146461, is not liable in any way whatsoever for consequences and/or damages resulting from the improper, incomplete and untimely dispatch, receipt and/or content of this e-mail. DISCLAIMER: This message is intended exclusively for the addressee(s) and may contain confidential and privileged information. If you are not the intended recipient please notify the sender immediately and destroy this message. Unauthorized use, disclosure or copying of this message is strictly prohibited. The foundation 'Stichting Deltares', which has its seat at Delft, The Netherlands, Commercial Registration Number 41146461, is not liable in any way whatsoever for consequences and/or damages resulting from the improper, incomplete and untimely dispatch, receipt and/or content of this e-mail.
comprehensive_test.tar.gz
Description: comprehensive_test.tar.gz
------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/
_______________________________________________ Plplot-devel mailing list Plplot-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/plplot-devel
