It's easiest to just give a link.  Read this Wikipedia article:
http://en.wikipedia.org/wiki/Twisted_pair

It's a fairly short article and well worth the read.

Brian Cluff

On 02/11/2013 01:38 PM, Michael Havens wrote:
As I've learned from experience! Thanks for the help,guys. Now for the
million dollar question; why does it introduce errors?
:-)~MIKE~(-:


On Mon, Feb 11, 2013 at 12:37 PM, Gilbert T. Gutierrez, Jr.
<[email protected]
<mailto:[email protected]>> wrote:

    Mike,
    It does matter the order. What you were taught would introduce all
    forms of errors.

    in the connector from left to right with the copper contacts and the
    cable crimp facing you...

    B Standard (Most commonly used)
    Pin 1: orange white
    Pin 2: orange
    Pin 3: green white
    Pin 4: blue
    Pin 5: blue white
    Pin 6: green
    Pin 7: brown white
    Pin 8: brown

    A Standard
    Pin 1: green white
    Pin 2: green
    Pin 3: orange white
    Pin 4: blue
    Pin 5: blue white
    Pin 6: orange
    Pin 7: brown white
    Pin 8: brown

    To make a standard cable, both cables sides should be the same. To
    make a crossover cable, you crimp one side A and the other side B.
    You will also find differences in cable that will cause issues with
    some cable ends. Never strip the insulation off of the conductors
    and make sure that you have cable insulation inside the retaining
    crimp of the connector to relieve strain on the cable.

    Gilbert


    On 2/10/2013 10:25 PM, Michael Havens wrote:

        so then (my cables are stripe, solid) the proper way to do it is:

           stripe orange,orange
           stripe green,blue
           stripe blue,green
           stripe brown,brown

        I was taught,

           blue, stripe blue
           green, stripe orange
           orange, stripe green
           brown, stripe brown
        :-)~MIKE~(-:


    ------------------------------__---------------------
    PLUG-discuss mailing list - [email protected].__org
    <mailto:[email protected]>
    To subscribe, unsubscribe, or to change your mail settings:
    http://lists.phxlinux.org/__mailman/listinfo/plug-discuss
    <http://lists.phxlinux.org/mailman/listinfo/plug-discuss>




---------------------------------------------------
PLUG-discuss mailing list - [email protected]
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss


---------------------------------------------------
PLUG-discuss mailing list - [email protected]
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss

Reply via email to