'Unplugging without mounting' may leave the filesystem in inconsistent state
that only needs software to fix.
If you want to validate hardware via brute force try:
dd if=/dev/<your HD device> of=/dev/null
that will read the device track by track on its entirety.
If you want a deeper check (and can afford to erase the drive) try:
dd if=/dev/zero of=/dev/<your HD device>
that will write binary zeroes all over the drive, what was years past a 'low
level format'
If you get exasperated, just shoot the damn thing and buy another one...
:)
The test that you are running may take a lifetime. Those are very through
but they were designed when a 100 MB (yes, MB, *NOT* GB) was big.
Now that the sizes are orders of magnitude bigger, the times are
exponentially larger.
Grab a beer and forget about it...
ET
Michael writes:
I was wondering hpow many cycles does it run through? this stupid thing has
run almost 4 hours nnow an test 2 patterns! I'm going to bed!
On Sat, Dec 17, 2016 at 1:36 AM, Michael <[email protected]> wrote:
Well.... I was having difficultie unmounting an auto-mounteddrive to run
badblocks but I figured that out..... anyways so far two passes have
completed withno errors. I was thinking that the reason it failed was
because I had unplugged it w umount first/shouldn't it not fail ifI
accidently do that?
--
:-)~MIKE~(-:
---------------------------------------------------
PLUG-discuss mailing list - [email protected]
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss
