On 8/26/20 8:32 AM, Michael Butash wrote:
My desktop would do this with a dongle converter + hdmi cable, some
6ft, one 10. and the displays not starting would randomly change,
requiring the same hard unplug/plug at the DP port. I was hoping the
combo cable would help this trying with my laptop, but mostly the same.
It's like whatever chinese adapter chip they use are clones of a clone
of a clone at this point, and just somewhat flaky crap. Like what you
get with flaky serial adapters, sd-radios, and other cheap electronics
from wish or alibaba, but the bad clones are so pervasive now, you
can't NOT get a piece of crap part anywhere.
...but there aren't any fancy chips involved with your cables.
DisplayPort is capable of directly outputting and HDMI or DVI signal,
and that's what your cables are doing. If you wanted to involve Chinese
chips, you would have to spend the extra money on an active converter,
otherwise all you have is a cable with a pin out that pulls an HDMI
signal out of the display port connector.
Brian Cluff
---------------------------------------------------
PLUG-discuss mailing list - [email protected]
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
