I'm plugging in the camera, and it's not mounting automatically. I'm not sure what steps to take to get it working. I'm not familiar with all the steps to get from a USB device to a filesystem mount.
'lsusb' makes it appear that the system knows the camera is there. I see device files in /dev which seem to correspond to the camera. Same information shows up in dmesg. I'm used to seeing a device as something like /dev/sda, and I can mount that. I'm not sure how to do that with the multiple USB /dev files I'm seeing. (There are 4 files in /dev which appear related to the camera, /dev/usbdev2.10*, see 'ls' output below.)
The camera powered off a few times while I was poking about, and dmesg shows it was re-detected every time I powered it back on.
My iPod mounts automatically when plugged in, with either the Apple or Rockbox firmware. Is there some other module, driver, or daemon I need to install to get the same behavior from my camera?
thanks, alex [EMAIL PROTECTED]:~$ ls /dev/usb* /dev/usb1 /dev/usbdev1.1_ep00 /dev/usbdev2.10_ep81 /dev/usbdev3.1_ep00 /dev/usb2 /dev/usbdev1.1_ep81 /dev/usbdev2.10_ep83 /dev/usbdev3.1_ep81 /dev/usb3 /dev/usbdev2.10_ep00 /dev/usbdev2.1_ep00 /dev/usbdev4.1_ep00 /dev/usb4 /dev/usbdev2.10_ep02 /dev/usbdev2.1_ep81 /dev/usbdev4.1_ep81 [EMAIL PROTECTED]:~$ lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 010: ID 04a9:3058 Canon, Inc. PowerShot A40 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 [EMAIL PROTECTED]:~$ dmesg | tail [44597.812000] usb 2-2: configuration #1 chosen from 1 choice [44897.276000] usb 2-2: USB disconnect, address 7[44939.524000] usb 2-2: new full speed USB device using uhci_hcd and address 8
[44939.684000] usb 2-2: configuration #1 chosen from 1 choice [45028.984000] usb 2-2: USB disconnect, address 8[45051.648000] usb 2-2: new full speed USB device using uhci_hcd and address 9
[45051.808000] usb 2-2: configuration #1 chosen from 1 choice [45351.284000] usb 2-2: USB disconnect, address 9[45465.160000] usb 2-2: new full speed USB device using uhci_hcd and address 10
[45465.320000] usb 2-2: configuration #1 chosen from 1 choice
signature.asc
Description: OpenPGP digital signature
--------------------------------------------------- PLUG-discuss mailing list - [email protected] To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
