On 1/12/07, Vaibhav Kulkarni <[EMAIL PROTECTED]> wrote:
Open your modem configuration web page. I think for the BSNL modems
the default is http://192.168.1.1 . It would ask for authentication
information. The default is username: admin, password: admin .
In the left hand pane go to "WAN Settings". There you should find the
setting for configuring the modem in either PPP mode or Bridge (PPPoE)
mode. Save the settings, which should restart the modem.
Sorry, I can't find a way to set PPP mode. Here is the dump of the WAN
config page :
----------------------------------
WAN Configurations
No VPI/VCI Type Default Note
_ _ _ Route _
PVC-0_ 8 / 35 _ Bridged _ _ Edit
PVC-1_ 0 / 100 _ Bridged _ _ Edit
PVC-2_ 0 / 32 _ Bridged _ _ Edit
PVC-3_ 8 / 81 _ Bridged _ _ Edit
PVC-4_ 8 / 32 _ Bridged _ _ Edit
PVC-5_ 14 / 24 _ Bridged _ _ Edit
PVC-6_ 0 / 35 _ PPPoE _ [check_ok] _ Edit
Specify following properties and click 'Apply' to commit.
PVC-6:
PPPoE properties:
VPI/VCI: [0 ] / [35 ]
Encapsulation: (*)LLC ( )VC-Muxed
Default Route: (*)Enabled ( )Disabled
User Name: [ ]
Password : [ ]
Use DNS: (*)Enabled ( )Disabled
[Apply] [Delete] [Clear]
--------------------------------------------
--
Thanks,
Roy
--
______________________________________________________________________
Pune GNU/Linux Users Group Mailing List: ([email protected])
List Information: http://plug.org.in/cgi-bin/mailman/listinfo/plug-mail
Send 'help' to [EMAIL PROTECTED] for mailing instructions.
