On Mon, Jan 19, 2009 at 12:26 AM, Ratnadeep Deshmane <[email protected]> wrote: > Hello friends, > I have nokia 3230 with idea gprs and i want to configure it for open > suse 11.0. I have problem with wvdial command...
SNIP > i have edited wvdial.conf properly.. it just don't detect the modem .. > > please help me configure it properly.. > i am stuck at this problem for many days.. The kernel has to have "USB Modem (CDC ACM) support" What is the output for "lsmod|grep acm" ? For me it is --------------- cdc_acm 12672 0 usbcore 113344 5 cdc_acm,usbhid,ehci_hcd,uhci_hcd -------------- USB modems are used with /dev/ttyACM* devices So, once the correct modules are loaded (manually or otherwise) and the modem is "on" (for my palm treo 680, there is a "USB modem" application I run on the handset before I do the wvdialconf step) "wvdialconf wvdial.conf" should show something like this ------------- Scanning your serial ports for a modem. Port Scan<*1>: Scanning ttyS1 first, /dev/modem is a link to it. ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Port Scan<*1>: S0 S2 S3 ttyACM0<*1>: ATQ0 V1 E1 -- OK ttyACM0<*1>: ATQ0 V1 E1 Z -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyACM0<*1>: Modem Identifier: ATI -- LowRider ttyACM0<*1>: Speed 4800: AT -- OK ttyACM0<*1>: Speed 9600: AT -- OK ttyACM0<*1>: Speed 19200: AT -- OK ttyACM0<*1>: Speed 38400: AT -- OK ttyACM0<*1>: Speed 57600: AT -- OK ttyACM0<*1>: Speed 115200: AT -- OK ttyACM0<*1>: Speed 230400: AT -- OK ttyACM0<*1>: Speed 460800: AT -- OK ttyACM0<*1>: Max speed is 460800; that should be safe. ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found an USB modem on /dev/ttyACM0. Modem configuration written to wvdial.conf ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" ------------- The wfdial.conf reads ------------- [Dialer Defaults] Modem = /dev/ttyACM0 Baud = 460800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ISDN = 0 Modem Type = USB Modem ; Phone = <Target Phone Number> ; Username = <Your Login Name> ; Password = <Your Password> ------------- At this stage, one is ready to go. I hope there are sufficient hints here to get you started. Cheers Chetan -- ______________________________________________________________________ Pune GNU/Linux Users Group Mailing List: ([email protected]) List Information: http://plug.org.in/cgi-bin/mailman/listinfo/plug-mail Send 'help' to [email protected] for mailing instructions.
