Anong magandang configuration ng kernel kapag meron kang mixed ide & scsi cd
drives?
I've got an IDE CDROM(CREATIVE) and a SCSI CDWRITER(YAMAHA) I just got this
from CD-writing howto. Should I compile it as a module or to built to
kernel? I've also read that it's not
a good idea to compile drivers as module if you've got mixed
devices/controllers.
Sect. Description Module SCSI IDE PP
------------------------------------------------------------
BLOCK Enhanced IDE/MFM/RLL... Y
BLOCK IDE/ATAPI CDROM ide-cd M
BLOCK SCSI hostadaptor emulation ide-scsi M
BLOCK Loopback device loop M M M
PARIDE Parallel port IDE device paride Y/M
PARIDE Parallel port ATAPI CD-ROMs M
PARIDE Parallel port generic ATAPI M
PARIDE (select a low-level driver) Y
SCSI SCSI support scsi_mod Y/M Y/M
SCSI SCSI CD-ROM support sr_mod Y/M Y/M
SCSI Enable vendor-specific Y Y
SCSI SCSI generic support sg Y/M Y/M
SCSI (select a low-level driver) Y
Two days ago kasi, my xcdroast .98 was working fine. After recompiling my
kernel,
ayaw nang mag cd write. I noticed something on my bootup on the SCSI part.
Before, I see
a message which says , SCSI.... executed SCRIPT, successful. Pero ngayon,
wala na.
I also saw a tip regarding NCR chips, but I haven't tried it.
And, I need a suggestion kung anong magandang IDE-CDROM. I'm receiving this
error kasi
when I do a cdrecord -scanbus
WARNING: controller returns wrong size for CD capabilities page.
>From Schilling's quote: It tells you that your drive has a firmware bug.
This happened when I added append="hdd=ide-scsi" in my lilo.conf.
Kailangan kasi ito para makita ng xcdroast ang device.
tia
Ronneil Camara [EMAIL PROTECTED]
One Consulting Group Phone: (63)2 6354086
IT Consultant Mobile: (63)917 5326993
___ _ _ ( ) ___ ___ __ _ _ _ __ _ _ _ __ _
/ _ \| ' \| |/ -_) / _ / _` | \ / |/ _` | `_/ _` |
\___/|_||_|_|\___| \___\__,_|_|'|_|\__,_|_| \__,_|
-
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
