Hi!
Naresolve ko na rin, yung only_from pala sa xinetd wala ang IP address ng
nagios server. I thought single value lang siya....
Salamat ulit sa mga tulong niyo sa Nagios...
----- Original Message -----
From: Maenard Martinez
To: PLUG List
Sent: Sunday, June 08, 2008 6:07 PM
Subject: NRPE - remote host won't accept connection from monitoring server
Hi!
Salamat sa mga tulong niyo! Na-install ko na yung NRPE for both remote and
monitor servers.
Pero di ko maintindihan kung papano magku connect ang monitoring server sa
remote server. These are the configuration:
Remote Server
/etc/xinet.d/nrpe --> only_from = <assigned IP address of the remote server>
Monitoring Server
/etc/xinet.d/nrpe --> only_from= <IP address of the monitoring server>
When I run check_nrpe -H <hostname of monitoring server> from the monitoring
server, it works well. The same with the remote server - check_nrpe -H
<hostname of remote server> - successful din. I telnet the port 5666, it
connects fine pero the daemon disconnects the request.
Pero based on the Nagios console, yung status - Connection refused by host.
But if I run the command - check_nrpe -H <hostname of the remote server> from
the monitoring server, yung error - could not complete SSL handshake. I know on
the nrpe.pdf, it says that I should run xinetd.d under localhost, but I am
confused how the monitoring server can connect to the remote server if the
latter is running on the loopback address.
I am checking the net, and apparently the xinetd should be running on
assigned IP of the remote server, which I did. Pero what's refusing the
connectoin request from the monitoring server?
Thanks.
_________________________________________________
Philippine Linux Users' Group (PLUG) Mailing List
http://lists.linux.org.ph/mailman/listinfo/plug
Searchable Archives: http://archives.free.net.ph
