On Tue, 2009-03-31 at 20:44 -0700, Russell Johnson wrote: > On Mar 31, 2009, at 7:13 PM, Michael Robinson wrote: > > > > > An FVX 538 is connected, it is connected to the battery backed up > > power outlet. There is no way for a Netgear FVX 538 to take a > > signal from a battery back up device. > > > OK, if the ups has an interface, then plug it into the computer your > going to put nut on. Unless it's a network interface, then it really > doesn't matter, as you put the IP in the nut config. > > Russell Johnson > [email protected]
Here's the rub, nut doesn't seem to support the Cyberpower 425VA ups model CPS425SL. Even if it does, which driver??? I don't know if I have the right serial cable, I have a gray one where I'm sure that the cable that came with it is black. The APC B cable is different than the APC C serial cables, so I suspect the wrong cable could be a problem trying to get signal to/from the Cyberpower unit. _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
