I got your last message, subject "Random failures." I just don't have any ideas for you, sorry.
-wes On Fri, Jun 11, 2010 at 8:46 AM, Denis Heidtmann <[email protected]>wrote: > (Resend. Wednesday's send did not get through.) > > Occasionally when I boot my machine it hangs at the Ubuntu screen. > Pressing > the power button is the only cure. Restarting usually goes fine. > Sometimes there is an on-screen message which goes much too fast to read. > I managed to take a video of the screen once when this occurred. When I > get the failure, I get the usual startup message: Boot from hd0.0 ext3 ... > That stays on the screen for what seems like an unusually long time, then > the message "...nForce2_Smbus 0000:00:01.1: Error probing SMB2. Starting > up > ..." appeared. > > I looked in the dmesg for this, and I find: > ... > [ 27.564121] udev: starting version 151 > [ 27.568555] Adding 5574512k swap on /dev/sda5. Priority:-1 extents:1 > across:5574512k > [ 27.667831] EDAC MC: Ver: 2.1.0 Jun 3 2010 > [ 27.706474] i2c i2c-0: nForce2 SMBus adapter at 0x600 > [ 27.706480] ACPI: resource nForce2_smbus [0x700-0x73f] conflicts with > ACPI region SM00 [0x700-0x73f] > [ 27.706482] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 27.706485] nForce2_smbus 0000:00:01.1: Error probing SMB2. > [ 27.712505] lp: driver loaded but no devices found > [ 27.727096] k8temp 0000:00:18.3: Temperature readouts might be wrong - > check erratum #141 > [ 27.727199] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 27.843374] EDAC amd64_edac: Ver: 3.2.0 Jun 3 2010 > [ 27.857388] type=1505 audit(1276142598.664:2): operation="profile_load" > pid=639 name="/sbin/dhclient3" > [ 27.857623] type=1505 audit(1276142598.664:3): operation="profile_load" > pid=639 name="/usr/lib/NetworkManager/nm-dhcp-client.action" > [ 27.857754] type=1505 audit(1276142598.664:4): operation="profile_load" > pid=639 name="/usr/lib/connman/scripts/dhclient-script" > [ 27.861785] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS > [ 27.862064] input: Video Bus as > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input5 > ... > > This error message appears in dmesg every time, with and without the > failure, so it may be unrelated. > > Ideas? > > Thanks, > -Denis > _______________________________________________ > PLUG mailing list > [email protected] > http://lists.pdxlinux.org/mailman/listinfo/plug > _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
