Previously I mentioned difficulties I had with an inconsistent partition table that prevented me from using gparted. I fixed it and then made it worse again; at present it looks like this:
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 104 heads, 52 sectors/track, 361228 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa8a8a8a8 Device Boot Start End Blocks Id System /dev/sdb2 235352062 782227455 273437697 5 Extended /dev/sdb5 235352064 245116927 4882432 82 Linux swap / Solaris /dev/sdb6 245118976 293956512 24418768+ 83 Linux /dev/sdb7 293947392 782243003 244147806 83 Linux I was able to see in in gparted until I used Partition Table Doctor (a Windows application) on it. PTD noted slight gaps between some of the partitions (logical) and offered to "correct" this. What I have now is sdb7 going slightly beyond the end of sdb2 (the extended partition) and sdb6 and sdb7 also overlapping slightly. Exactly how could I fix this? I know that fdisk doesn't make permanent changes before "w" is issued. Do you have to delete all the partitions before re-creating the table? Or can you just change the offending one? Changing sdb7 alone, at both ends, would correct the overlap. Also, I note that in no case is there a gap of only one sector from one partition to the next. How large should it be, and how accurately do you have to estimate it? Robert "Tim" Kopp http://analytic.tripod.com/ _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
