According to a brief goog, there are issues connecting interfaces with player v4. Supposed to be fixed in v5. Other than that, it seems possible to do. I’ve never used player. I run Fusion on the mac.
On Jul 10, 2014, at 8:22 PM, Chuck Hast <[email protected]> wrote: > No, I am not ready to move it to the ESXi yet, I am still running it in > VMWare > Player on a linux machine. I just want to add a 2nd network adapter, which I > have done, but for some reason it does not want to talk to the 2nd NIC card > on my machine. The first virtual adapter talks to the first NIC card just > fine, > but when I try to make the second one talk to the second card, no joy, I am > setting it up in bridged mode, if I use NAT I can not get back into it from > the > other network, just outgoing. I would like to use bridged so it gets it's > own IP > and I can access it remotely, once I have everything the way I want it I > will > move the VM over to the ESXi machine, I have several applications with > dual adapters running just fine there, it is on the VM Player that I am > having > issues. > > > > On Thu, Jul 10, 2014 at 5:18 PM, Louis Kowolowski <[email protected]> > wrote: > >> Are you actually wanting to move it from your desktop to esxi? If so, you >> should be able to use VMware converter (free from vmware last I checked). I >> believe there is a linux version. It will read in the VM files locally, and >> connect to your ESXi (or vcenter) and deposit things there. Once there, the >> config should be much easier. If you don’t have vcenter, you can do >> everything through VIC (vmware infrastructure client). If you have vcenter, >> you should be able to access the webby interface and do what you need to >> that way. >> It should be approx.: >> choose which interfaces are associated with which networks (your esxi will >> need to either have vlan tagging on the vswitches, or different uplinks for >> each vswitch). >> make sure you check the box for “connected” >> boot your vm >> you should see both interfaces show up (not familiar with icinga vms >> specifically, so I can’t answer why they start at a particular number) and >> you can configure the interfaces in the normal fashion. >> >> >> On Jul 10, 2014, at 1:28 PM, Chuck Hast <[email protected]> wrote: >> >>> Folks, >>> I have a VM with Icinga setup on it. The VMWare host is running on >>> Xubuntu 14.04. >>> >>> The Icinga VM is CentOS 6, I am now able to interrogate devices on >>> my network, but now I want to be able to use two Ethernet ports on >>> the VM one to talk to the network I am monitoring and the other to >>> talk to the business network in the building so that the application can >>> be observed remotely. >>> >>> I have setup ESXi machines, that was a no brainer, setting up each >>> port and giving the VM's the virtual ports, but this test machine I am >>> running on is using VMWare Player. I have two network adaptors en- >>> abled on it, one for the SCADA network I am monitoring and the other >>> for the business network so it can be accessed remotely. >>> >>> The problem is I can not get the VM to see both adaptors, as setup in >>> VMWare Player, it will see one or the other, it does bring up two ether >>> net ports if there are two adaptors setup. I have used the VMWare tool >>> to map each adaptor to the physical nics, but still no joy. The other >> thing >>> I notice is that the ethernet ports on the VM start at eth3 and go up, >> not >>> sure why it does not start at eth0. >>> >>> I am also trying to figure out what they have done with the network >>> stuff in this VM, if anyone is familiar with the Icinga VM's I could use >>> some guidance. My application is talking nicely to the devices on the >>> SCADA loop, just need to be able to get it off of my desktop to other >>> people's browsers. >>> >>> >>> -- >>> >>> Chuck Hast -- KP4DJT -- >>> Glass, five thousand years of history and getting better. >>> The only container material that the USDA gives blanket approval on. >>> _______________________________________________ >>> PLUG mailing list >>> [email protected] >>> http://lists.pdxlinux.org/mailman/listinfo/plug >> >> -- >> Louis Kowolowski [email protected] >> Cryptomonkeys: >> http://www.cryptomonkeys.com/ >> >> Making life more interesting for people since 1977 >> >> >> _______________________________________________ >> PLUG mailing list >> [email protected] >> http://lists.pdxlinux.org/mailman/listinfo/plug >> >> > > > -- > > Chuck Hast -- KP4DJT -- > Glass, five thousand years of history and getting better. > The only container material that the USDA gives blanket approval on. > _______________________________________________ > PLUG mailing list > [email protected] > http://lists.pdxlinux.org/mailman/listinfo/plug -- Louis Kowolowski [email protected] Cryptomonkeys: http://www.cryptomonkeys.com/ Making life more interesting for people since 1977
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
