Folks, I just did a update to a RPi B+. Before I did the update all was working just fine, after doing so I lost my network connection (wifi) I can see the interfaces but no IP. I plug in a ethernet cable, but do not see the dhcp client pulling an address, I reboot the RPi, and then I get addresses on both the wired and wireless side. I figure that all was OK so I pull the wired side, within seconds both ports have lost their IP addresses. I can see in the syslog where it happens, for some reason looks like the dhcp client is removing BOTH addresses, even worse in order to get a link back I have to reboot the thing.
I can drop a chunk of syslog on here, but figured I would ask first just in case someone has seen this. I looked on line, seems the others who have seen this were running static. Before I did the upgrade it worked just fine. -- Chuck Hast -- KP4DJT -- Glass, five thousand years of history and getting better. The only container material that the USDA gives blanket approval on. _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
