On Wed, Mar 1, 2017 at 11:56 PM, John Jason Jordan <[email protected]> wrote: > On Wed, 1 Mar 2017 10:03:12 -0800 > John Jason Jordan <[email protected]> dijo: > >>On Tue, 28 Feb 2017 20:50:01 -0800 >>wes <[email protected]> dijo: >> >>>You should remove the Netgear from the network. Once you do that, set >>>your laptop back to 192.168.0.x and everything should work again. >> >>That is not clear to me. If I remove the Netgear from the network, >>nothing will go anywhere. It has a patch cord to the new modem, and >>patch cords to a 16-port and an 8-port switch, into which are connected >>both computers, the HDHomeRun, and several printers. Looking at the >>Admin page with Firefox it lists 'connected devices' as: >> >> 192.168.1.25 Brother desktop printer >> 192.168.1.126 Laptop wireless >> 192.168.1.136 Laptop eth1 >> 192.168.1.148 HDHomeRun >> 192.168.1.100 Android phone > > Partial success: I succeeded in getting the Synology working by > downloading and installing the .deb file for "Synology Assistant" > provided on Synology's web site. This allowed me to reset its IP > address, so now the router sees it. I still couldn't mount it until I > remembered that I had entered it in /etc/fstab and, sure enough, the > setting in fstab still had the . . 0 . address. I changed in fstab et > voilà! > > Still can't get the desktop to see the internet. :(
You could at least temporarily set the network up on the desktop to use DHCP and see if that fixes the problems. If you later want to switch it back to static ip addresses you can use the settings it gets via DHCP as a guide. Bill > _______________________________________________ > PLUG mailing list > [email protected] > http://lists.pdxlinux.org/mailman/listinfo/plug _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
