Hi. I have a server running on RAID 1 with the following partitions: /sda1 / /dev/md0 /boot /dev/md1 /usr /dev/md2 /var My server is Redhat 6.2 with kernel 2.2.16-3. It works fine until I upgraded it (using source distribution) to 2.2.19. After I rebooted to the new kernel, I got this error: Starting up RAID devices: /dev/md0: Invalid argument /dev/md0 is not a RAID or LINEAR array /dev/md1 is not a RAID or LINEAR array /dev/md2 is not a RAID or LINEAR array *** An error occured during the RAID Startup I compiled the new kernel with Linear and Raid 0, 1, 4 & 5 enabled. I also noticed that my original lilo.conf contains a line initrd=/boot/initrd-2.2.16-3.img so, I created a new initrd-2.2.19.img but the problem still remains. What could be wrong here and what should I do to solve this ? Many thanks.... JARED _ Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph To leave: send "unsubscribe" in the body to [EMAIL PROTECTED] To subscribe to the Linux Newbies' List: send "subscribe" in the body to [EMAIL PROTECTED]
