ppl,
my apology on posting this problem on a linux mailing list, but just
wanna give a bit of try if anybody here have experience on setting up this
device.
i do have right now your Netopia 660-DDS with v3.3 os software. i tried
connecting it to my Cisco 2610 router via
leased line (not in frame-relay). i just wanted to use your features of
PPP or HDLC encapsulations to connect. but seems its not working.
fyi, heres my configs of your product:
Connection Profiles:
Profile Name: Profile Name
Profile Enabled: Yes
IP Enabled: Yes
IP Profile Parameters...
IPX Enabled: No
Data Link Encapsulation: HDLC
for IP Profile Parameters:
IP Addressing... Numbered
Local WAN IP Address: 192.168.0.66
Local WAN IP Mask: 255.255.255.252
Remote WAN IP Address: 192.168.0.65
Remote WAN IP Mask: 255.255.255.252
Filter Set...
Remove Filter Set
Recieved RIP: Off
Transmit RIP: off
--------------------------------------
Under Line Configuration
Serial Line Configuration
Circuit Type... Permanent Sync
Data Rate (kbps) 512
Invert Tx Clock: No
Circuit Activation Requires... DCD and DSR
Data Link Encapsulation HDLC
--------------------------------------------
For the Quick View
Current WAN Status
Profile Name--------State-%Use-Remote Address----Est.---More Info
Bigfoot Port1 0 IP 192.168.0.65 Lsd
LED Status
---Ethernet--------CH1-----MGMT----CH2----CARD---PWR----LEDS
LNK LNK TX COL AUI RX LNK RDY TX RX LNK |Other
0 - - - - - 0 0 - - - - 0 |Legend
------------------------------------------------------------
On the other hand... heres my Cisco 2610 Configuration.
!
interface Serial0/1
ip address 192.168.0.65 255.255.255.252
no ip directed-broadcast
no ip mroute-cache
!
but when ill check the status...
Serial0/1 is up, line protocol is down
Hardware is PowerQUICC Serial
Internet address is 192.168.0.65/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation HDLC, loopback not set, keepalive set (10 sec)
Last input 22:11:02, output 00:00:02, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
7 packets input, 1032 bytes, 0 no buffer
Received 7 broadcasts, 0 runts, 0 giants, 0 throttles
84327783 input errors, 78 CRC, 630 frame, 0 overrun, 0 ignored,
84327075 abort
13707 packets output, 328653 bytes, 0 underruns
0 output errors, 0 collisions, 4547 interface resets
0 output buffer failures, 0 output buffers swapped out
8 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
...line protocol is down... anybody from here can help me?
ill already did tried both PPP and HDLC Encapsulation and tried also all
Circuit Activation Requirments(DCD-only, DSR-only, DCD and DSR options).
tried also setting Data Rate to Auto speed.
for visualization:
Netopia 660 DDS CSU/DSU CSU/DSU Cisco 2610
_____ ___ ___ ______
| |_________| |___________| |________|s0/1 |
|_____|V.35 |___| |___|V.35 DTE|______|
Nokia BB512 Nokia BB512
Hoping for any positive reply. Thank you very much.
sincerely yours,
Gene Frederick F. Boniel
Virtual Communications, Inc.
Rm. 202 K&J Bldg. Llorente St.
Brgy. Capitol Site, Cebu City
Philippines 6000
E-mail : [EMAIL PROTECTED]
Mobile : +63 916 3423122
Office : +63 032 2541954
_
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
To subscribe to the Linux Newbies' List: send "subscribe" in the body to
[EMAIL PROTECTED]
