On Saturday 21 December 2002 01:52 am, [EMAIL PROTECTED] wrote:
i have not done port forwarding like this in a while, and i'm not reading
the docs. so the ff may not be right. just impression.
> iptables -t nat -A PREROUTING -i eth1 -p TCP --dport 25 -s 0.0.0.0/0 -j
> DNAT --to 192.168.0.2:25
should that be -i eth0 instead? since eth0 is the interface that is facing
the internet.
> iptables -t nat -A PREROUTING -i eth1 -p TCP --dport 110 -s 0.0.0.0/0 -j
> DNAT --to 192.168.0.2:110
same, should be eth0?
> I've checked my setup by sending an email to [EMAIL PROTECTED] but
> unfortunately, it bounced back and tells:
>
> Unable to deliver message to the following address(es).
do you have a host on the internet, and can you telnet to port 25 or
port 110 from there? if you post the IP number to talk to, maybe
someone on the list (maybe even me) could do the telnet
test.
tiger
--
Gerald Timothy Quimpo tiger*quimpo*org gquimpo*sni-inc.com tiger*sni*ph
Public Key: "gpg --keyserver pgp.mit.edu --recv-keys 672F4C78"
Veritas liberabit vos.
Doveryai no proveryai.
_
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
Fully Searchable Archives With Friendly Web Interface at http://marc.free.net.ph
To subscribe to the Linux Newbies' List: send "subscribe" in the body to
[EMAIL PROTECTED]
