On Thu, 2003-03-20 at 02:56, Howard Bagcat wrote: > i tried modifying /etc/courier/imapd with: > > AUTHMODULES="authpgsql" #replacing "authdaemon" > AUTHMODULES_ORIG="authcustom authcram authuserdb authldap authpgsql authpam" > #replacing authdaemon > > and i get some logs like... > > Mar 18 14:07:32 tux imapd: Connection, ip=[::ffff:203.172.17.180] > Mar 18 14:07:35 tux imapd: /usr/lib/courier/authlib/authpgsql: No such file or > directory
Does /usr/lib/courier/authlib/authpgsql exist? Please check? I have a different location because I installed from source and in my setup, I have this file. Is authpgsql installed in the default setup of the rpm you have? By default (from source), I have to configure courier-imap to include pgsql support. I'm not sure if all modules are installed on rpm's. If you can, try to install from source. > > Quoting Mike Liguit <[EMAIL PROTECTED]>: > > > This is my etc/imapd file. > > > > ADDRESS=111.222.333.444 > > PORT=143 > > MAXDAEMONS=40 > > MAXPERIP=10 > > PIDFILE=/var/run/imapd.pid > > TCPDOPTS="-nodnslookup -noidentlookup" > > > > AUTHMODULES="authpgsql" #to use postgresql authentication > > > > AUTHMODULES_ORIG="authcustom authcram authuserdb authldap authpgsql > > authpam" > > DEBUG_LOGIN=0 > > IMAP_CAPABILITY="IMAP4rev1 CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT > > THREAD=REFERENCES SORT QUOTA IDLE" > > IMAP_CAPABILITY_ORIG="IMAP4rev1 CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT > > THREAD=REFERENCES SORT AUTH=CRAM-MD5 AUTH=CRAM-SHA1 IDLE" > > IMAP_IDLE_TIMEOUT=60 > > IMAP_CAPABILITY_TLS="$IMAP_CAPABILITY AUTH=PLAIN" > > IMAP_CAPABILITY_TLS_ORIG="$IMAP_CAPABILITY_ORIG AUTH=PLAIN" > > IMAP_DISABLETHREADSORT=0 > > IMAP_CHECK_ALL_FOLDERS=1 > > IMAP_OBSOLETE_CLIENT=0 > > IMAP_ULIMITD=65536 > > IMAP_USELOCKS=0 > > IMAP_ENHANCEDIDLE=0 > > IMAP_TRASHFOLDERNAME=Trash > > IMAP_EMPTYTRASH=Trash:7 > > IMAP_MOVE_EXPUNGE_TO_TRASH=1 > > SENDMAIL=/usr/sbin/sendmail > > HEADERFROM=X-IMAP-Sender > > IMAPDSTART=NO > > > > and this is my etc/authpgsqlrc file: > > > > PGSQL_PORT 5432 > > PGSQL_USERNAME courier > > PGSQL_PASSWORD imap > > PGSQL_DATABASE courier > > PGSQL_USER_TABLE passwd #an existing table in postgres > > PGSQL_CRYPT_PWFIELD crypt > > PGSQL_UID_FIELD uid #an existing field in postgres > > PGSQL_GID_FIELD gid #an existing field in postgres > > PGSQL_LOGIN_FIELD id #an existing field in postgres > > PGSQL_HOME_FIELD home #an existing field in postgres > > PGSQL_NAME_FIELD name #an existing field in postgres > > > > > > On Thu, 2003-03-20 at 01:44, Howard Bagcat wrote: > > > Quoting Mike Liguit <[EMAIL PROTECTED]>: > > > > > > > I have Qmail/Courier-Imap/Postresql that works well on RedHat 8.0. I did > > > > it from source though. TLS is an option for security but I believe it > > > > should be there too. > > > > > > > > authmodulelistorig="authcustom authcram authuserdb authldap authmysql > > > > > > > > Where's authpgsql? > > > > > > i already did some corrections in the /etc/courier/authpgsqlrc and same > > error occurs > > > > > > authmodulelist="authpgsql" > > > authmodulelistorig="authcustom authcram authuserdb authldap authpgsql > > authmysql > > > authpam" > > > daemons=5 > > > version="" > > > authdaemonvar=/var/run/courier/authdaemon > > > > > > > > > > > > > > > > > > > > > > > On Wed, 2003-03-19 at 22:45, Howard Bagcat wrote: > > > > > > > > > > anyone familiar with courier-imap and courier-imap-pgsql combination, > > i > > > > just installed it via rpm and i > > > > > end up not able to connect imap server. here's what i get from > > > > /var/log/main/info > > > > > > > > > > Mar 18 09:36:17 tux imapd: Connection, ip=[::ffff:203.172.17.179] > > > > > Mar 18 09:36:17 tux imapd: couriertls: accept: error:14094418:SSL > > > > routines:SSL3_READ_BYTES:tlsv1 > > > > > alert unknown ca > > > > > > > > > > > > > Mar 18 09:36:17 tux imapd: couriertls: acceptConnection reset by peer > > > > > > > > > > i did some googling and i was able to read documents about SASL?! it > > says > > > > that SASL will play the role > > > > > of passing "auth" variables to pam, which i believed pass that > > information > > > > to pgsql for authentication of > > > > > smtp users. talkin' about SASL, is Cyrus-SASL compatible for > > > > Courier-imap/Courier-imap-pgsql > > > > > implementation? and... do i really have to enable TLS? is it required > > for > > > > postfix and courier-imap? > > > > > > > > > > btw, here's some settings: > > > > > > > > > > /etc/pam.d/imap > > > > > auth required pam_nologin.so > > > > > auth required pam_stack.so service=system-auth > > > > > account required pam_stack.so service=system-auth > > > > > session required pam_stack.so service=system-auth > > > > > > > > > > /etc/courier/imapd > > > > > ADDRESS=0 > > > > > PORT=143 > > > > > MAXDAEMONS=1000 > > > > > MAXPERIP=8 > > > > > PIDFILE=/var/run/courier/imapd.pid > > > > > TCPDOPTS="-nodnslookup -noidentlookup" > > > > > AUTHMODULES="authdaemon" > > > > > AUTHMODULES_ORIG="authdaemon" > > > > > IMAP_CAPABILITY="IMAP4rev1 CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT > > > > > THREAD=REFERENCES SORT" > > > > > IMAP_CAPABILITY_ORIG="IMAP4rev1 CHILDREN NAMESPACE > > THREAD=ORDEREDSUBJECT > > > > > THREAD=REFERENCES SORT AUTH=CRAM-MD5 AUTH=CRAM-SHA1 IDLE" > > > > > IMAP_IDLE_TIMEOUT=60 > > > > > IMAP_CAPABILITY_TLS="$IMAP_CAPABILITY AUTH=PLAIN" > > > > > IMAP_CAPABILITY_TLS_ORIG="$IMAP_CAPABILITY_ORIG AUTH=PLAIN" > > > > > IMAP_DISABLETHREADSORT=0 > > > > > IMAP_CHECK_ALL_FOLDERS=0 > > > > > IMAP_OBSOLETE_CLIENT=0 > > > > > IMAP_ULIMITD=65536 > > > > > IMAP_USELOCKS=0 > > > > > IMAP_EMPTYTRASH=Trash:1 > > > > > IMAP_MOVE_EXPUNGE_TO_TRASH=1 > > > > > IMAPDSTART=YES > > > > > > > > > > /etc/courier/authdaemonrc > > > > > authmodulelist="authldap" > > > > > authmodulelistorig="authcustom authcram authuserdb authldap authmysql > > > > > authpam" > > > > > daemons=5 > > > > > version="" > > > > > authdaemonvar=/var/run/courier/authdaemon > > > > > > > > > > /etc/courier/authpgsqlrc > > > > > PGSQL_HOST localhost > > > > > PGSQL_PORT 5432 > > > > > PGSQL_USERNAME postgres > > > > > PGSQL_PASSWORD > > > > > PGSQL_DATABASE courier > > > > > PGSQL_USER_TABLE passwd > > > > > PGSQL_CLEAR_PWFIELD clear > > > > > PGSQL_UID_FIELD uid > > > > > PGSQL_LOGIN_FIELD id > > > > > PGSQL_HOME_FIELD home > > > > > PGSQL_NAME_FIELD name > > > > > PGSQL_MAILDIR_FIELD maildir > > > > > PGSQL_QUOTA_FIELD quota > > > > > > > > > > Regards, Howard. > > H o w a r d R. B a g c a t > WebAdmin, MUWeb - Edition 4 Project <http://www.mu.edu.ph> > Systems Programmer, RBT/RBK & MUMC Project > Misamis University.Ozamiz City.Philippines > tel: 088.521.0367.local.109 | cel: 63.0919.5536179 > > Imagination is more important than knowledge > -Albert Einstein > > > > > Sulat @MU v.2.2 (Fresh) > An extended module for MUWeb4 Project of Howard R. Bagcat > Powered by GNU General Public License softwares. > > http://my.mu.edu.ph - a personalized portal is soon to come. > > > _ > Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph > To leave: send "unsubscribe" in the body to [EMAIL PROTECTED] > > Fully Searchable Archives With Friendly Web Interface at http://marc.free.net.ph > > To subscribe to the Linux Newbies' List: send "subscribe" in the body to [EMAIL > PROTECTED] _ Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph To leave: send "unsubscribe" in the body to [EMAIL PROTECTED] Fully Searchable Archives With Friendly Web Interface at http://marc.free.net.ph To subscribe to the Linux Newbies' List: send "subscribe" in the body to [EMAIL PROTECTED]
