Thanks for the -help. I got part of that -help when I entered an incorrect
option, but somehow missed the -- entries at the end. Here is what I get:
denis@denis-ThinkPad-L420:~$ sigrok-cli --driver
mastech-mas345:conn=/dev/ttyUSB0 --scan
The following devices were found:
mastech-mas345 - MASTECH MAS345 with 1 channel: P1
denis@denis-ThinkPad-L420:~$ sigrok-cli --driver
mastech-mas345:conn=/dev/ttyUSB0 --show
mastech-mas345 - MASTECH MAS345 with 1 channel: P1
Supported driver options:
conn
serialcomm
Supported configuration options:
denis@denis-ThinkPad-L420:~$
Additionally I tried:
denis@denis-ThinkPad-L420:~$ sigrok-cli --driver
mastech-mas345:conn=/dev/ttyUSB0 --loglevel 5
sr: libsigrok loglevel set to 5.
sr: backend: Sanity-checking all drivers.
sr: backend: Sanity-checking all input modules.
sr: backend: Sanity-checking all output modules.
srd: libsigrokdecode loglevel set to 5.
Usage:
sigrok-cli [OPTION...]
snip...
I also tried the --output-file but nothing. I found that I could not enter
more than one option at a time---I tried --scan and --show but only the
first one was responded to.
BTW, recall that this instrument worked as expected using the vendor's
windows sw on the desktop, where I have a serial port. So I do not suspect
the hardware outside the laptop.
These results are encouraging, but no cigar.
-Denis
_______________________________________________
PLUG mailing list
[email protected]
http://lists.pdxlinux.org/mailman/listinfo/plug
