You have at least these options (from easiest to harder):
1. Setup USB device filter in vBox GUI. Windows should detect it when
connected.
2. Copy USB content to a directory, share it with guest and map it as a
drive in Windows.
3. Make proper copy of your USB, setup a raw disk vdi and attach it to your
VM. This requires command line work and I would not recommend it, given the
amount of USB mount issues you experience with your installation.

All these are pretty well documented in vBox documents. This is pretty
standard and well walked task. I would avoid long email threads.

Hope it helps,
Tomas

On Tue, Mar 12, 2019, 10:54 AM John Jason Jordan <[email protected]> wrote:

> On Mon, 11 Mar 2019 23:38:15 -0700
> Nat Taylor <[email protected]> dijo:
>
> >So, when you put the SD card in the reader, did Virtualbox see it, and
> >were you able to try to tell Virtualbox to send it to the VM?
>
> VirtualBox doesn't see it, nor does it not see it; that is, there is no
> way to tell. It's not like there is a 'browse' option to navigate to
> the device. I have no way to be sure that what I entered is correct or
> even that it is in the right slot in the GUI.
>
> Part of the problem is that I don't know if the reader (built into the
> side of the laptop) is USB or not. But if it is USB that may be the
> source of the problem, because I can't get any other USB devices to
> appear either.
>
> When I insert the card into the slot it appears in Xubuntu; I can
> browse the contents, manipulate the partitions with Gparted, etc. I can
> also insert it into a USB adapter, and again, it appears in Xubuntu.
>
> The net is full of talk about problems getting USB devices to appear in
> VirtualBox guests, with most queries unresolved. I did find one post
> where the user had an almost identical problem to mine and, while there
> was no solution, he gave lengthy data from using VirtualBox at the
> command line. I didn't even know there were command line options, so
> that is my next avenue to explore.
>
> The card contains medical data that I need to view in a Windows
> program. Unfortunately, the program expects to find the data in a
> separate drive, not in a folder somewhere. The Windows 10 guest shows C
> (the VDI) and D (the optical drive). This device should show up as an E
> drive, but so far no luck.
> _______________________________________________
> PLUG mailing list
> [email protected]
> http://lists.pdxlinux.org/mailman/listinfo/plug
>
_______________________________________________
PLUG mailing list
[email protected]
http://lists.pdxlinux.org/mailman/listinfo/plug

Reply via email to