Going to look at it tonight but that looks logical. And it follows the thread I was picking up in the sequence of commands.
On Tue, Aug 25, 2020 at 12:21 PM David Bridges <[email protected]> wrote: > On Tue, 2020-08-25 at 10:02 -0700, Tomas Kuchta wrote: > > Could you boot Knoppix on the box and expand the partition with > > gparted? > > > > Btw: output from: fdisk -l + /etc/fstab would be more useful than df > > The space did actually get allocated but only to ubuntu-vg (the volume > group) > > > VG Size 9.09 TiB > > PE Size 4.00 MiB > > Total PE 2383615 > > Alloc PE / Size 51200 / 200.00 GiB > > Free PE / Size 2332415 / <8.90 TiB > > > The logical volume (ubuntu--vg-ubuntu--lv) was only allocated a small > portion of the space. > > gparted, well any partitioning tool is not what you need here, you just > need to extend the logical volume and then resize the file system. > > Resizing the logical volume and resizing the file system can be done > while the file system is mounted. The commands below are examples of > how you can do this. > > lvextend -l +2332415 /dev/mapper/ubuntu--vg-ubuntu--lv > > The command above will use up the rest of the free PE's (physical > extents) Instead of using the -l you can use -L and specify a specific > amount of disk space instead of the number of extents to extend the > logical volume by. > > man lvextend is your friend. > > > Once the logical volume has been extended you can then resize the file > system using the following command. > > resize2fs -F -f /dev/mapper/ubuntu--vg-ubuntu--lv > > The command above assumes an ext2/ext3/ext4 file system. If your file > system is something else you would need to use the appropriate commands > to resize it. > > man resize2fs is also your friend. > > -- > David > > > > -T > > > > On Tue, Aug 25, 2020, 06:22 Chuck Hast <[email protected]> wrote: > > > > > Folks, > > > I just setup a Zoneminder server the machine has 9 Tb of > > > drive but when I did the Ubuntu server setup it only allocated > > > 200Gb. Here are some numbers: > > > > > > root@komodo:/home/kp4djt# df > > > Filesystem 1K-blocks Used Available Use% > > > Mounted > > > on > > > udev 18430452 0 18430452 0% > > > /dev > > > tmpfs 3694824 1444 3693380 1% > > > /run > > > /dev/mapper/ubuntu--vg-ubuntu--lv 205375464 11628640 183244680 6% > > > / > > > tmpfs 18474116 2222680 16251436 13% > > > /dev/shm > > > tmpfs 5120 0 5120 0% > > > /run/lock > > > tmpfs 18474116 0 18474116 0% > > > /sys/fs/cgroup > > > /dev/sda2 999320 106304 824204 12% > > > /boot > > > /dev/sda1 523248 7956 515292 2% > > > /boot/efi > > > /dev/loop1 56320 56320 0 100% > > > /snap/core18/1880 > > > /dev/loop0 30720 30720 0 100% > > > /snap/snapd/8542 > > > /dev/loop2 73088 73088 0 100% > > > /snap/lxd/16099 > > > tmpfs 3694820 0 3694820 0% > > > /run/user/1000 > > > /dev/loop3 56704 56704 0 100% > > > /snap/core18/1885 > > > /dev/loop4 30720 30720 0 100% > > > /snap/snapd/8790 > > > /dev/loop5 72320 72320 0 100% > > > /snap/lxd/16922 > > > root@komodo:/home/kp4djt# > > > /dev/mapper/ubuntu--vg-ubuntu--lv 205375464 11628640 183244680 6% > > > / > > > is the one of interest. > > > > > > Here is more info: > > > root@komodo:/home/kp4djt# vgdisplay -v > > > --- Volume group --- > > > VG Name ubuntu-vg > > > System ID > > > Format lvm2 > > > Metadata Areas 1 > > > Metadata Sequence No 2 > > > VG Access read/write > > > VG Status resizable > > > MAX LV 0 > > > Cur LV 1 > > > Open LV 1 > > > Max PV 0 > > > Cur PV 1 > > > Act PV 1 > > > VG Size 9.09 TiB > > > PE Size 4.00 MiB > > > Total PE 2383615 > > > Alloc PE / Size 51200 / 200.00 GiB > > > Free PE / Size 2332415 / <8.90 TiB > > > VG UUID 799iwc-0lYp-Mh3T-I5JO-lPoW-vodP-rUtr7C > > > > > > This is where the video from the Zoneminder cameras will > > > be stored. I need to increase the size of the Alloc PE / Size > > > 51200 / 200.00 GiB > > > to access most if not all of the remaining Free PE / Size > > > 2332415 / <8.90 TiB > > > > > > I am not sure how to go about this one but need to expand > > > that to where it will not fill up with camera video.I really only > > > need 2 Tb of the space but might as well use as much as > > > possible due to where the cameras are located. > > > > > > I have looked at the documentation but not sure what I am > > > doing as I have never had to do this. I really do not want to > > > mess this ZM install up as it is working like clockwork, and > > > I want to keep it that way. > > > > > > Any guidance? > > > > > > -- > > > > > > Chuck Hast -- KP4DJT -- > > > I can do all things through Christ which strengtheneth me. > > > Ph 4:13 KJV > > > Todo lo puedo en Cristo que me fortalece. > > > Fil 4:13 RVR1960 > > > _______________________________________________ > > > PLUG: https://pdxlinux.org > > > PLUG mailing list > > > [email protected] > > > http://lists.pdxlinux.org/mailman/listinfo/plug > > > > > _______________________________________________ > > PLUG: https://pdxlinux.org > > PLUG mailing list > > [email protected] > > http://lists.pdxlinux.org/mailman/listinfo/plug > > _______________________________________________ > PLUG: https://pdxlinux.org > PLUG mailing list > [email protected] > http://lists.pdxlinux.org/mailman/listinfo/plug > -- Chuck Hast -- KP4DJT -- I can do all things through Christ which strengtheneth me. Ph 4:13 KJV Todo lo puedo en Cristo que me fortalece. Fil 4:13 RVR1960 _______________________________________________ PLUG: https://pdxlinux.org PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
