There was a twit.tv podcast on this a few years ago in the context of IP connected security cameras. They walked through the ideal topology for a home network where 10-20 IP cameras are hooked up to a small NAS/Zoneminder computer. I can't find the exact video though and it had some relevant ideas.

What are you planning to do with these Zeros? Are they going to be part of a cluster or just doing randomly things independently of each other?

-Ben



On 1/16/21 8:51 PM, Eric House wrote:
I'm playing with Raspberry Pi Zeros, trying to integrate a handful of
them into my home network. I'm thinking they could replace the VM that
currently handles http[s] traffic to my home domain.

Zeros, for those who don't know, are $5 512M/single-core ARM devices
with only a micro-USB OTG port for connectivity. If you configure them
correctly, you can provide power and networking over the same cable so
there's not too much cable clutter added.

pi@pz1:~ $ cat /proc/cpuinfo
processor : 0
model name : ARMv6-compatible processor rev 7 (v6l)
BogoMIPS : 997.08
Features : half thumb fastmult vfp edsp java tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xb76
CPU revision : 7

Hardware : BCM2835
Revision : 900093
Model : Raspberry Pi Zero Rev 1.3

So far I've succeeded in building a version of OpenWRT that runs on a
Pi 4, which has standard USB ports. I've plugged a four-port USB hub
into one of them. As Zeros connected to the hub come up, usb<n>
entries are created in the output of 'ip addr'. I added an interface
that bridges them together, gets them networked via DHCP, and
generally convinces me that what I'm doing will work.

The question is: what's the best way to integrate them into my
network? I'm not sure I need another OpenWRT box, as most of what it
does -- firewalling, dhcp, etc. -- can already be done by my gateway
router. Really the only requirement of the box they connect through is
that it have a USB port (which my Ubiquity X doesn't). If there were a
package like OpenWRT but focussed on load-balancing rather than
routing perhaps it'd be a better choice.

Thanks!

--Eric

_______________________________________________
PLUG: https://pdxlinux.org
PLUG mailing list
[email protected]
http://lists.pdxlinux.org/mailman/listinfo/plug

Reply via email to