Brian Hawkins wrote: > I mean the distance between the screws on the bottom of the drive. The > width between the screws is probably pretty close to 3.5" > > Brian
Oh, you mean the bottom screws you would use to mount in the enclosure? They are exactly the same distance apart (about 1.5") as the front two side screws, but offset about .5" back from the front side screws. There are two screws (of the 4) that mount the circuit board to the hard drive casing that are roughly 3.5" apart. /* PLUG: http://plug.org, #utah on irc.freenode.net Unsubscribe: http://plug.org/mailman/options/plug Don't fear the penguin. */
