Holy resurrection Batman! I want browsing hack a day and saw this link http://www.hackaday.com/2007/11/01/diy-servo-motor-controller/ The I remembered this thread, it seems relevant, I hope it helps!
Sincerely, Steve On Oct 27, 2007 8:23 PM, Gabriel Gunderson <[EMAIL PROTECTED]> wrote: > On Sat, 2007-10-27 at 20:01 -0600, Jeff Anderson wrote: > > I know projects exist, and most controllers for cnc > > machines are parallel or serial driven, and that is easy enough to > > code for, no matter what operating system you are using. > > I hacked this together once in C#. It was the first code I tested under > Mono. In fact, I never got it working under Windows because it was a > pain getting full control over the parallel port and before I could > finish, I lost all interest in Windows. It's somewhat ironic as I > thought I'd code it for Windows and port it to Linux using Mono. > Anyway, on Linux I used parapin[0] and made calls to it from C#. > > I would still be interested in making an easy to use, cross platform, > high level, object oriented framework for driving steppers. I'm not > talking about just spinning them one way or the other, but being able to > set the table size, lead-screw pitch, full steps per revolution, etc. > > One day when I'm rich, I'll have time to play with this stuff. Until > then, if anyone ends up playing with this kinda stuff, please let me > know. > > Gabe > > 1) http://parapin.sourceforge.net/ > > > > /* > PLUG: http://plug.org, #utah on irc.freenode.net > Unsubscribe: http://plug.org/mailman/options/plug > Don't fear the penguin. > */ > /* PLUG: http://plug.org, #utah on irc.freenode.net Unsubscribe: http://plug.org/mailman/options/plug Don't fear the penguin. */
