On Fri, Jun 27, 2008 at 7:13 PM, Levi Pearson <[EMAIL PROTECTED]> wrote: > First, ditch HyperTerminal and get TeraTerm. From what I've found, > the HP 9000 K series expects an HP 700/96 terminal. You can use a > serial terminal emulator, but you may run into terminal emulation > issues if it doesn't directly support the 700/96 emulation. You'll > need a null-modem cable and to set your terminal program to 9600/8/N/1 > and no flow control.
By the way, that did the trick. Thanks for the help, guys. We fired up TeraTerm, and were able to interact with the machine through the serial cable. Derek /* PLUG: http://plug.org, #utah on irc.freenode.net Unsubscribe: http://plug.org/mailman/options/plug Don't fear the penguin. */
