With the RSC card in, have you already tried hooking your serial connection (i.e. hyperterm or minicom) to the RSC port and verified console is not redirected to it?
On Thu, Jan 8, 2009 at 9:55 AM, Nicholas Leippe <[email protected]> wrote: > I've search several sun hardware groups, several sun hardware faqs, and > still, > I can't find anything that describes this behavior. > I've removed both the RSC card, and the vga card, leaving only the serial > connection. > When I boot into diagnostic mode I see: > > > > ... snip 15min of tests ... > > > System is operating in Service Mode. > > Reading temperature limits from FRUPROMs: CPU0/2 CPU1/3 MB I/O DBP0 > > Environmental monitor is ON > {3} ok > > > At which point it accepts no input. Bugger. > > > /* > PLUG: http://plug.org, #utah on irc.freenode.net > Unsubscribe: http://plug.org/mailman/options/plug > Don't fear the penguin. > */ > /* PLUG: http://plug.org, #utah on irc.freenode.net Unsubscribe: http://plug.org/mailman/options/plug Don't fear the penguin. */
