Background: On Transporter IR blaster sends out IR for Power on, Power off, Volume up, Volume down. 4 different codes. Transporter volume set fixed at 100 as it plays mostly encoded music (DTS). Three remote devices are used, the standard Slim remote, A Philips Pronto which is fully functional with 2 way IP to SqueezeCenter over TCP using CLI, and the Jive remote.
With regard to power on/off; All three remotes operate as designed. The Transporter sends out the proper IR code when it is powered on or powered off, independent of which remote is used. When doing a volume up or volume down, the Transporter sends out the Proper IR codes for the Audio processor to control the volume when it is the normal slim remote driving it, or the Philps Pronto which sends CLI commands for mixer volume up or down +5 units to SqueezeCenter. The problem is with the Jive platform. It always causes the Transporter to send out the Volume Up IR command independent of whether the volume up or down button was pressed. I assume it is commanding Squeezecenter but probably not using the CLI interface so it can be the plugin. -- barrygordon ------------------------------------------------------------------------ barrygordon's Profile: http://forums.slimdevices.com/member.php?userid=7468 View this thread: http://forums.slimdevices.com/showthread.php?t=40658 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/plugins
