godIsInTheRadio wrote: > > 1. If I have CONDUCTOR/CONDUCTORSORT enabled in Custom Tags and no value > for Conductor in mixed tags and flagged "Include Custom Tags" there, > then using a Custom Browse standard "Conductor" Browse Menu should show > the Conductors in alphabetical order if CONDUCTOR / CONDUCTORSORT pairs > are matched in tags? > No, if you want the CONDUCTOR/CONDUCTORSORT tags scanned by Custom Scan, you need to use one of the Custom Browse menu templates that takes data from Custom Scan. The "Mixed Tags" menu template is probably easiest and just specify the tag you want to use on each hierarchy. Depending on the hierarchy you want it might also work with one of the templates which names start with "Custom Tags" or "Custom Multiple Tags".
The Conductors template take data from the standard LMS tables will will due to this not be affected by Custom Scan scanning. godIsInTheRadio wrote: > > 2. What if for the same conductor sometimes sort values are set, > sometimes not? > Good question. My first advice would be to adjust the tags. It might work without adjusting the tags, but I'm not completely sure. godIsInTheRadio wrote: > > 3. Will LMS not scan the CONDUCTOR tag at all if I leave it out of the > Mixed Tag settings? Or is that just relevant for Custom Scan / Custom > Browse logic? > LMS will still scan CONDUCTOR and show it in the Artists menu if you have configured Conductors to be shown in the Artists menu. The Custom Tag and Mixed Tag module will only affect Custom Browse based browse menus and they will only affect the Custom Browse based menus which is based on Custom Scan data. ------------------------------------------------------------------------ erland's Profile: http://forums.slimdevices.com/member.php?userid=3124 View this thread: http://forums.slimdevices.com/showthread.php?t=93868 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
