Hello Brad, As far as I know you need to specify two seperate fifo's like this:
imt_path[inbound]: /tmp/pmacct_inbound.pipe imt_path[outbound]: /tmp/pmacct_outbound.pipe You then have to rum pmacct twice, once for inbound and once for outbound data using the -p /tmp/pmacct_<dir>.pipe HTH. Regards, Ruben Laban On Tuesday 17 July 2007, Broadband Solutions wrote: > Hi Guys > > I have just setup pmacct on my debian etch server. I am monitoring a class > C, at the moment I only want inbound/outbound traffic figures (total) for > one particular IP. > > I have a problem where pmacct only seems to be displaying outbound traffic. > Well, I think it is outbound. How can I get seperate figures for outbound > and inbound? > > Below is my /etc/pmacct/pmacctd.conf file, and also the results of a > "pmacct -s" > > Can anyone see what I am doing wrong? > > Thank you kindly > > /etc/pmacct/pmacctd.eth0.conf: > > syslog:daemon > interface: eth0 > daemonize: true > promisc: true > > aggregate[inbound]: dst_host > aggregate[outbound]: src_host > aggregate_filter[inbound]: dst net 192.168.69.0/24 > aggregate_filter[outbound]: src net 192.168.69.0/24 > > plugins: memory[inbound], memory[outbound] > > plugin_pipe_size:1024000 > plugin_buffer_size:8192 > > imt_buckets: 65537 > imt_mem_pools_size: 1024000 > > And here is the results of a "pmacct -s": > > server4:~# pmacct -s > SRC_IP PACKETS BYTES > 192.168.69.50 651 57186 > 192.168.69.1 91 12658 > 192.168.69.2 2071 193743 > > For a total of: 3 entries > > > > > Regards, > > Brad Draper _______________________________________________ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists
