In fact, we've make another workaround: we had two routers old and new,
some subscribers were on new, some on old.

We've moved all subscribers to new :-)

On Wed, Nov 7, 2012 at 6:01 PM, Paolo Lucente <[email protected]> wrote:

> Hi Evgeniy,
>
> Thanks for confirming that. Let me know if the workaround i provided
> is acceptable and, should remote access to the box be an option, i'd
> be more than happy to troubleshoot the issue for you - just drop me
> an email privately.
>
> Cheers,
> Paolo
>
> On Wed, Nov 07, 2012 at 10:45:15AM +0300, Evgeniy Kozhuhovskiy wrote:
> > ugenk@debian:~$ uname -a
> > Linux debian 2.6.32-5-amd64 #1 SMP Sun May 6 04:00:17 UTC 2012 x86_64
> > GNU/Linux
> > ugenk@debian:~$ cat /etc/debian_version
> > 6.0.6
> >
> > On Tue, Nov 6, 2012 at 5:43 PM, Paolo Lucente <[email protected]> wrote:
> >
> > > Hi Evgeniy,
> > >
> > > I was wondering which OS are you hitting this issue since testing in
> lab
> > > your config against a Linux box it works OK (ie. don't get into the
> "Can't
> > > bridge Address Families when in transparent mode" situation); if, like
> > > Brian is suggesting, a solution is to specify a valid IP address via
> the
> > > nfacctd_ip directive then the workaround is to run one nfacctd process
> per
> > > IP address, replicating NetFlow data to the same receivers - no harm in
> > > doing that.
> > >
> > > Cheers,
> > > Paolo
> > >
> > > PS: Brian same question to you: which OS did you hit this issue? Can
> you
> > >     post here or privately your config?
> > >
> > > On Tue, Nov 06, 2012 at 09:18:57AM +0300, Evgeniy Kozhuhovskiy wrote:
> > > > But the problem is that i need to listen on two interfaces...
> > > >
> > > > On Tue, Nov 6, 2012 at 6:31 AM, Brian Talley <[email protected]>
> wrote:
> > > >
> > > > > I had the same issue until I specified a valid IPv4 listening
> address
> > > with
> > > > > the 'nfacctd_ip' directive.
> > > > >
> > > > > On Mon, Nov 5, 2012 at 4:55 PM, Evgeniy Kozhuhovskiy <
> > > > > [email protected]> wrote:
> > > > >
> > > > >> I'm trying to make tee with tee_transparent: true,
> > > > >> but i got such error:
> > > > >>
> > > > >> Nov 06 01:50:36 ERROR ( nfa/tee ): Can't bridge Address Families
> when
> > > in
> > > > >> transparent mode. Exiting ...
> > > > >> Nov 06 01:50:36 INFO: connection lost to 'nfa-tee'; closing
> > > connection.
> > > > >> Nov 06 01:50:36 ERROR ( bill/tee ): Can't bridge Address Families
> > > when in
> > > > >> transparent mode. Exiting ...
> > > > >> Nov 06 01:50:36 INFO: connection lost to 'bill-tee'; closing
> > > connection.
> > > > >> Nov 06 01:50:36 INFO: no more plugins active. Shutting down.
> > > > >>
> > > > >> config is pretty simple:
> > > > >>
> > > > >> daemonize: true
> > > > >> logfile: /var/log/nfacctd-tee.conf
> > > > >> plugins: tee[nfa],tee[bill]
> > > > >> nfacctd_port: 9994
> > > > >> tee_receiver[nfa]: 127.0.0.1:9996
> > > > >> tee_receiver[bill]: 127.0.0.1:9995
> > > > >> tee_transparent: true
> > > > >>
> > > > >> when i remove tee_transparent: true, nfacctd starts ok.
> > > > >>
> > > > >> --
> > > > >> With best regards, Evgeniy Kozhuhovskiy
> > > > >>
> > > > >> _______________________________________________
> > > > >> pmacct-discussion mailing list
> > > > >> http://www.pmacct.net/#mailinglists
> > > > >>
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Brian Talley
> > > > > [email protected]
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > pmacct-discussion mailing list
> > > > > http://www.pmacct.net/#mailinglists
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > With best regards, Evgeniy Kozhuhovskiy
> > >
> > > > _______________________________________________
> > > > pmacct-discussion mailing list
> > > > http://www.pmacct.net/#mailinglists
> > >
> > > _______________________________________________
> > > pmacct-discussion mailing list
> > > http://www.pmacct.net/#mailinglists
> > >
> >
> >
> >
> > --
> > With best regards, Evgeniy Kozhuhovskiy
>



-- 
With best regards, Evgeniy Kozhuhovskiy
_______________________________________________
pmacct-discussion mailing list
http://www.pmacct.net/#mailinglists

Reply via email to