Hi Olivier, The scenario is supported. You using 1.5.0rc1? If so, you need to add a flow_to_rd_map map. More info in: "examples/flow_to_rd.map.example" in the pmacct distribution tarball. In principle you should need just a line like:
id=<route distinguisher> ip=0.0.0.0/0 Let me know how it goes. Cheers, Paolo On Fri, Oct 11, 2013 at 08:02:02PM +0200, Olivier Benghozi wrote: > Hi, > > I'm trying to implement a working config of nfacctd with bgp thread to push > some netflow stuff into a PostgreSQL DB. > > I have some Netflow v5 streams (that is, transporting few information) and > an i-MP-BGP reflected session, which sends all the routing table in the > VPNv4 address family (nothing in the IPv4 unicast AFI/SAFI), since the > traffic is in a VRF. > My problem is that I need to have those VPNv4 routes (whose the Route > Distinguisher is known) to be successfully matched with the netflow records > by nfacctd, to fill all the fancy AS information (as_path, src_as, and so > on). > > In my conf I use things like bgp_agent_map (to match all netflow speakers > to my unique BGP session router_id, with bgp_ip=the.rou.ter.id ip= > 0.0.0.0/0), bgp_peer_src_as_type: bgp, and bgp_src_as_path_type: bgp. > > But src_as, as_path... sadly stay at 0. > > Is this working mode possible? Is there something obviously wrong in my > parameters? > > Thanks by advance . > > > -- > Olivier Benghozi > Wifirst > _______________________________________________ > pmacct-discussion mailing list > http://www.pmacct.net/#mailinglists _______________________________________________ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists
