Hi Steve, You are entirely correct, i've just fixed the doc which will be shortly available through the CVS repository. Thanks very much for reporting the issue.
Cheers, Paolo On Wed, Dec 18, 2013 at 11:43:53AM -0500, Steve Clark wrote: > Hi, > > Reading section X. of the QUICKSTART GUIDE I am confused by the following > example > where tag2 is referenced but the filter is using set_tag, shouldn't it be > set_tag2? > > nfprobe_direction[plugin_name]: tag2 > pre_tag_map: /path/to/pretag.map > > then edit the tag map as follows. A return value of '1' means ingress > while '2' is > translated to egress. It is possible to employ L2 and/or L3 addresses to > recognize > flow directions. The 'set_tag2' primitive (tag2) will be used to carry the > return > value: > > set_tag=1 filter='dst host XXX.XXX.XXX.XXX' > set_tag=2 filter='src host XXX.XXX.XXX.XXX' > > set_tag=1 filter='ether src XX:XX:XX:XX:XX:XX' > set_tag=2 filter='ether dst XX:XX:XX:XX:XX:XX' > > -- > Stephen Clark > *NetWolves* > Director of Technology > Phone: 813-579-3200 > Fax: 813-882-0209 > Email: [email protected] > http://www.netwolves.com > _______________________________________________ > pmacct-discussion mailing list > http://www.pmacct.net/#mailinglists _______________________________________________ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists
