A quick note to say we did troubleshoot the issue further with Yann and,
as a result of that, we have this commit in the master code:

https://github.com/pmacct/pmacct/commit/9fa8779344854ab876e3bcc6ff6f25c51c6df226

Cheers,
Paolo

On Wed, Jun 14, 2017 at 05:11:42PM +0200, Yann Belin wrote:
> Hello,
> 
> I am experiencing a strange behavior on nfacctd.
> 
> * On version 1.6.1, flows with protocol field set to 6 (TCP) will not
> show up at all.
> * On version 1.6.2, flows with protocol field set to 6 (TCP) will show
> up, but ip_src and ip_dst will be empty.
> 
> In both cases, flows with protocol field set to 17 (UDP) show up
> normally. I tried to set protocol fields to a couple of fixed values
> (flows are generated by a python script) and all display normally in
> both nfacct 1.6.1 and 1.6.2.... except 6/TCP, which systematically
> fails.
> 
> I took tcpdump captures, but cannot see any obvious problem. anyone has an 
> idea?
> 
> Link with logs/captures/ config -
> https://drive.google.com/file/d/0B0BcUrbXnp3sT0ZBOVN1d0RMWXM
> 
> Thanks,
> 
> Yann
> 
> _______________________________________________
> pmacct-discussion mailing list
> http://www.pmacct.net/#mailinglists

_______________________________________________
pmacct-discussion mailing list
http://www.pmacct.net/#mailinglists

Reply via email to