Good afternoon Paolo, I missed a part in the receiver config:
BEFORE: id=100 ip=192.168.10.50:3056 AFTER: id=100 ip=192.168.10.50:3056 tag=100 I'm sorry about that. I tested it and it worked! Thank you again for your help, Eric On Wed, Nov 18, 2020 at 12:22 PM eric c <xcell...@gmail.com> wrote: > Hello Paolo, > > Thank you for the reference. I just looked at this and tested it but it > did not filter out the network I specified. When I wiresharked on the > receiving host it was showing all traffic but not the specified network > (src_net=192.168.0.0/24) . > > Below are the configs I used: > > # nfacctd.conf > daemonize: false > nfacctd_port: 2055 > nfacctd_ip: 0.0.0.0 > logfile: /var/log/nfacctd.log > > tee_transparent: true > maps_index: true > > plugins: tee[a] > > tee_receivers[a]: tee_receivers.lst > pre_tag_map[a]: pretag.map > > plugin_buffer_size: 10240 > plugin_pipe_size: 1024000 > nfacctd_pipe_size: 1024000 > > # tee_receivers.lst > id=100 ip=192.168.10.50:3056 > > # pretag.map > set_tag=100 ip=0.0.0.0/0 src_net=192.168.0.0/24 > > I'm using nfacctd 1.7.5-git (20200510-00); FYI > > Is there another part I'm missing from the config? > > Thank you! > Eric > > > > > On Wed, Nov 18, 2020 at 10:46 AM Paolo Lucente <pa...@pmacct.net> wrote: > >> >> Hi Eric, >> >> You could look at this piece of documentation for what you are trying to >> do: https://github.com/pmacct/pmacct/blob/1.7.5/QUICKSTART#L2106-#L2200 >> >> The example focuses on src_mac and dst_mac, you should be using src_net >> and dst_net instead. >> >> Paolo >> >> On 18/11/2020 05:38, eric c wrote: >> > Good afternoon, >> > >> > Tring to setup nfacctd as replicator but would like to filter what >> > subnets to replicate to the next receiver. >> > >> > Below is a config that is working without filtering: >> > >> > # nfacctd.conf >> > daemonize: false >> > nfacctd_port: 2055 >> > nfacctd_ip: 0.0.0.0 >> > logfile: /var/log/nfacctd.log >> > >> > plugins: tee[a] >> > tee_receivers[a]: tee_nflow_receivers.lst >> > tee_transparent: true >> > >> > # tee_nflow_receivers.lst >> > id=1 ip=192.168.10.50:3056 <http://192.168.10.50:3056> >> > >> > What config change can I add to only replicate IP src/dst to >> 10.0.0.0/24 >> > <http://10.0.0.0/24> and 192.168.0.0/24 <http://192.168.0.0/24> for >> example? >> > >> > Thank you! >> > Eric >> > >> > _______________________________________________ >> > pmacct-discussion mailing list >> > http://www.pmacct.net/#mailinglists >> > >> >> >> _______________________________________________ >> pmacct-discussion mailing list >> http://www.pmacct.net/#mailinglists >> >
_______________________________________________ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists