Hello Sebastian, I am sorry, I did indeed mix up PdfPainter:DrawImage and PdfPainter::DrawXObject!
You are absolutely right: for DrawXObject you have to pass
PdfXObject::GetPageSize().GetWidth() and
PdfXObject::GetPageSize().GetHeight() as parameters for dScaleX and dScaleY.
You could also use PdfPainter::DrawImage to draw your XObject (as PdfImage is
a PdfXObject) and this is the case where PoDoFo will pick these default
values.
Sorry,
Dom
Am Mittwoch, 25. Juni 2008 schrieb EXTERNAL Loch Sebastian (Firma Ferchau;
BhP/TEF17):
> Hello Dom,
>
> again, I tried first at all your solution p.DrawXObject( 0, 0, &xo );
> but I'm getting an empty page!! That's why I tried to set the matrix
> of my own and I contacted the mailing list.
>
> If I look into the PdfPainter class for me p.DrawXObject( 0, 0, &xo );
> equals to p.DrawXObject( 0, 0, &xo, 1, 1 );
> Where PoDoFoPo will pick default values, i.e. the size of the Xobject??
>
> Anyways for me right it's ok as I got a working solution.
>
> Regards
> Sebastian
>
>
> -----Ursprüngliche Nachricht-----
> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Gesendet: Mittwoch, 25. Juni 2008 09:11
> An: EXTERNAL Loch Sebastian (Firma Ferchau; BhP/TEF17)
> Cc: [email protected]
> Betreff: Re: AW: AW: [Podofo-users] Conversion Cals to Pdf not working
> anymore sinceswitch from 0.5.0 to svn trunk!
>
> Yes, that is exactly the same PoDoFo does if you leave the parameters for
> dScaleX and dScaleY away. So p.DrawXObject( 0, 10, &xo, pdfWidth,
> pdfHeight ); and p.DrawXObject( 0, 10, &xo ); are equal.
>
> But at least it is working now :-) Sorry for the misunderstandings.
>
>
> Am Mittwoch, 25. Juni 2008 schrieb EXTERNAL Loch Sebastian (Firma Ferchau;
>
> BhP/TEF17):
> > I found a solution.
> >
> > When I specify the width and the height when drawing the Xobject it
> > works: p.DrawXObject( 0, 10, &xo, pdfWidth, pdfHeight );
> >
> > Maybe there's something wrong with the automatic setting of the matrix
> > with the size of the Xobject...
> >
> > Regards
> > Sebastian
> > -----Ursprüngliche Nachricht-----
> > Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> > Gesendet: Mittwoch, 25. Juni 2008 08:34
> > An: EXTERNAL Loch Sebastian (Firma Ferchau; BhP/TEF17)
> > Cc: [email protected]
> > Betreff: Re: AW: [Podofo-users] Conversion Cals to Pdf not working
> > anymore sinceswitch from 0.5.0 to svn trunk!
> >
> > Sorry, I think my answer was not clear. You do not have to set the
> > matrix, PoDoFo will do it for you.
> >
> > Unfortunately the old code of yours was setting the matrix in a wrong
> > way: p.DrawXObject( 0, vPos, &xo, 1, 1 );
> >
> > The last two parameters are 1 which result in a matrix like this:
> > 1.000 0 0 1.000 0.000 10.000 cm
> >
> > If you leave the last 2 parameters to PdfPainter::DrawXObject away,
> > PoDoFo will pick default values, i.e. the size of the XObject.
> >
> > So you onle have to use the line:
> > p.DrawXObject( 0, vPos, &xo );
> >
> > regards,
> > Dom
> >
> > Am Mittwoch, 25. Juni 2008 schrieb EXTERNAL Loch Sebastian (Firma
> > Ferchau;
> >
> > BhP/TEF17):
> > > At the moment, I don't see how to set the matrix.
> > > Maybe it's still to early...
> > >
> > > Probably by adding a key Matrix to the dictionary?
> > > How can I specify these six values to the corresponding key?
> > >
> > > Regards
> > > Sebastian
> > >
> > > -----Ursprüngliche Nachricht-----
> > > Von: [EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED] Im Auftrag von
> > > Dominik Seichter Gesendet: Dienstag, 24. Juni 2008 13:43
> > > An: [email protected]
> > > Cc: EXTERNAL Loch Sebastian (Firma Ferchau; BhP/TEF17)
> > > Betreff: Re: [Podofo-users] Conversion Cals to Pdf not working anymore
> > > sinceswitch from 0.5.0 to svn trunk!
> > >
> > > Hello,
> > >
> > > Matrix in the 0.5.0 PDF: 3168.000 0 0 2448.000 0.000 10.000 cm
> > > Matrix in the 0.6.0 PDF: 1.000 0 0 1.000 0.000 10.000 cm
> > > BBox of XObject in both: [ 0.0 0.0 3168.000 2448.000]
> > >
> > > So just setting the correct matrix before drawing the XObject does the
> > > trick.
> > >
> > > Instead of p.DrawXObject( 0, vPos, &xo, 1, 1 ); just do
> > > p.DrawXObject( 0, vPos, &xo );. PoDoFo will pick the correct default
> > > values for scaling the XObject. This change was necessary because we
> > > inconsistencies between drawing XObjects and Images. Sorry for the
> > > inconviniences the change caused for you.
> > >
> > > best regards,
> > > Dom
> > >
> > > Am Dienstag, 24. Juni 2008 schrieb EXTERNAL Loch Sebastian (Firma
> > > Ferchau;
> > >
> > > BhP/TEF17):
> > > > Hello all,
> > > >
> > > > I switched our project from old release 0.5.0 to the
> > > > actual version from trunk, but our main functionality
> > > > didn't work since this switch.
> > > >
> > > > We need to convert documents in Cals format to pdf.
> > > > With the new version a Pdf document is created, but you
> > > > see only a blank page!
> > > > I attached an example origin document plus the generated pdfs
> > > > with the old 0.5.0 and new version from trunk.
> > > > Maybe someone can see what's going wrong there...
> > > >
> > > > The conversion is done by the following:
> > > > -reading header data from cals containing width,height,dpi,...
> > > > -creating pdf page
> > > > -creating Xobject with subtype Image and CCITTFAXDecode filter
> > > > -> creating appropriate dictionary
> > > > -> setting raw data
> > > > -finally drawing XObject to page and writing pdf document
> > > >
> > > > For more details see see attached code.txt.
> > > >
> > > > At the moment I have no idea why this conversion is going wrong.
> > > > It seems that the created pdf has the "correct" structure,
> > > > but I don't know for sure! Maybe someone can have please a look
> > > > at the created files.
> > > >
> > > > Any help is appreciated!
> > > >
> > > > Thanks.
> > > >
> > > > Regards
> > > > Sebastian
--
**********************************************************************
Dominik Seichter - [EMAIL PROTECTED]
KRename - http://www.krename.net - Powerful batch renamer for KDE
KBarcode - http://www.kbarcode.net - Barcode and label printing
PoDoFo - http://podofo.sf.net - PDF generation and parsing library
SchafKopf - http://schafkopf.berlios.de - Schafkopf, a card game, for KDE
Alan - http://alan.sf.net - A Turing Machine in Java
**********************************************************************
signature.asc
Description: This is a digitally signed message part.
------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php
_______________________________________________ Podofo-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/podofo-users
