I run Ubuntu 8.10 i386/i686, Tor, Polipo 1.0.4 (from Ubuntu repositories), Firefox 3.0.11, Torbutton. Firefox is configured to connect through Tor with the help of Polipo.
I get "Proxy error: 502 Disconnected operation and object not in cache" generated by Polipo every time i start Firefox after logging in. For every page. "Update page" button doesn't help - same error. Workaround is to execute "sudo service polipo restart" (every time after logging in). Then every page loads normally. Full uninstall-reinstall (through Synaptic package manager) of Polipo doesn't help. cat /etc/polipo/config : ====================== # Sample configuration file for Polipo. -*-sh-*- # You should not need to edit this configuration file; all configuration # variables have reasonable defaults. # This file only contains some of the configuration variables; see the # list given by ``polipo -v'' and the manual for more. ### Basic configuration ### ******************* # Uncomment one of these if you want to allow remote clients to # connect: # proxyAddress = "::0" # both IPv4 and IPv6 # proxyAddress = "0.0.0.0" # IPv4 only proxyAddress = "127.0.0.1" proxyPort = 8123 # If you are enabling 'proxyAddress' above, then you want to enable the # 'allowedClients' variable to the address of your network, e.g. # allowedClients = 127.0.0.1, 192.168.42.0/24 allowedClients = 127.0.0.1 allowedPorts = 1-65535 # Uncomment this if you want your Polipo to identify itself by # something else than the host name: proxyName = "localhost" # Uncomment this if there's only one user using this instance of Polipo: cacheIsShared = false # Uncomment this if you want to use a parent proxy: # parentProxy = "squid.example.org:3128" # Uncomment this if you want to use a parent SOCKS proxy: socksParentProxy = "localhost:9050" socksProxyType = socks5 ### Memory ### ****** # Uncomment this if you want Polipo to use a ridiculously small amount # of memory (a hundred C-64 worth or so): # chunkHighMark = 819200 # objectHighMark = 128 # Uncomment this if you've got plenty of memory: # chunkHighMark = 50331648 # objectHighMark = 16384 ### On-disk data ### ************ # Uncomment this if you want to disable the on-disk cache: diskCacheRoot = "" # Uncomment this if you want to put the on-disk cache in a # non-standard location: # diskCacheRoot = "~/.polipo-cache/" # откомментировать, чтобы включить удаление объектов # из кэша, которые старше 10 дней (по умолчанию 32 дня), # при команде "polipo -x" (purge on-disk cache): # diskCacheUnlinkTime = 10 # Uncomment this if you want to disable the local web server: localDocumentRoot = "" # Uncomment this if you want to enable the pages under /polipo/index? # and /polipo/servers?. This is a serious privacy leak if your proxy # is shared. # disableIndexing = false # disableServersList = false disableLocalInterface = true disableConfiguration = true ### Domain Name System ### ****************** # Uncomment this if you want to contact IPv4 hosts only (and make DNS # queries somewhat faster): # dnsQueryIPv6 = no # Uncomment this if you want Polipo to prefer IPv4 to IPv6 for # double-stack hosts: # dnsQueryIPv6 = reluctantly # Uncomment this to disable Polipo's DNS resolver and use the system's # default resolver instead. If you do that, Polipo will freeze during # every DNS query: # dnsUseGethostbyname = yes ### HTTP ### **** # Uncomment this if you want to enable detection of proxy loops. # This will cause your hostname (or whatever you put into proxyName # above) to be included in every request: disableVia = true # Uncomment this if you want to slightly reduce the amount of # information that you leak about yourself: censoredHeaders = from,accept-language,x-pad,link censorReferer = false # Uncomment this if you're paranoid. This will break a lot of sites, # though: # censoredHeaders = set-cookie, cookie, cookie2, from, accept-language # censorReferer = true # Uncomment this if you want to use Poor Man's Multiplexing; increase # the sizes if you're on a fast line. They should each amount to a few # seconds' worth of transfer; if pmmSize is small, you'll want # pmmFirstSize to be larger. # Note that PMM is somewhat unreliable. # pmmFirstSize = 16384 # pmmSize = 8192 # Uncomment this if your user-agent does something reasonable with # Warning headers (most don't): # relaxTransparency = maybe # Uncomment this if you never want to revalidate instances for which # data is available (this is not a good idea): # relaxTransparency = yes # Uncomment this if you have no network: # proxyOffline = yes # Uncomment this if you want to avoid revalidating instances with a # Vary header (this is not a good idea): # mindlesslyCacheVary = true # Cut down suggestions from Incognito configuration: tunnelAllowedPorts = 1-65535 ====================== Please help to resolve this issue. ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge _______________________________________________ Polipo-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/polipo-users
