> it seems like this binary expect poppler-data in /usr/local/share/poppler, > but I installed poppler-data from rpm and it is locate in /usr/share/poppler.
conf.h (which is generated by configure) has #define POPPLER_DATADIR "/usr/local/share/poppler" configure runs 'pkg-config --exists --print-errors poppler-data' If it finds something, uses it, otherwise it sets POPPLER_DATADIR to $datarootdir/poppler You can set datarootdir with the configure --datarootdir=DIR option, for example configure --datarootdir=/usr/share Regards, William ________________________________ From: Min Su <[email protected]> Sent: Wednesday, January 25, 2017 6:15 PM To: William Bader Cc: [email protected] Subject: Re: [poppler] Questions about building poppler-utils 0.50.0 rpm for CentOS 7 Thanks William, What I need is only pdftoppm. I built poppler and get pdftoppm in /usr/local/bin, but it seems like this binary expect poppler-data in /usr/local/share/poppler, but I installed poppler-data from rpm and it is locate in /usr/share/poppler. If I don't want to create symlink /usr/local/share/poppler -> /usr/share/poppler, what should I do? Add prefix when config poppler? Thanks, Min On Thu, Jan 19, 2017 at 8:49 PM, William Bader <[email protected]<mailto:[email protected]>> wrote: I think that you will eventually have problems applying CentOS system updates if you replace the poppler package in the CentOS distribution with your package. If you need only a few of the poppler utilities and do not need libpoppler, you might be better off with a source build using configure --enable-static --disable-shared ; make, and then copying the utilities that you need to /usr/local/bin. Regards, William ________________________________ From: poppler <[email protected]<mailto:[email protected]>> on behalf of Min Su <[email protected]<mailto:[email protected]>> Sent: Thursday, January 19, 2017 8:05 PM To: [email protected]<mailto:[email protected]> Subject: [poppler] Questions about building poppler-utils 0.50.0 rpm for CentOS 7 Hi all, I need to install poppler 0.50.0 on my CentOS Linux release 7.2.1511. I took the Fedora SRPM, rebuild it on my system and got poppler-0.50.0-1.el7.centos.x86_64.rpm and poppler-utils-0.50.0-1.el7.centos.x86_64.rpm. After install these rpms, I got the binary I need and it seems like it works well. But when I check the dependency of this binary, I found it has dynamic references to some libraries in my system, for example: fontconfig, the fontconfig on system is 2.10 but poppler 0.50.0 requires at least fontconfig 2.12. Almost all dynamic dependencies on CentOS is very "old", and I don't want to upgrade all related libraries. What should I do now? Rebuild rpm with static reference? If so, how do I do that? Is it risky to have poppler 0.50.0 with all these old references? Thanks!
_______________________________________________ poppler mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/poppler
